- 您現在的位置：買賣IC網 > PDF目錄378284 > ADC12451883 (National Semiconductor Corporation) Dynamically-Tested Self-Calibrating 12-Bit Plus Sign A/D Converter with Sample-and-Hold PDF資料下載
參數資料
| 型號： | ADC12451883 |
| 廠商： | National Semiconductor Corporation |
| 英文描述： | Dynamically-Tested Self-Calibrating 12-Bit Plus Sign A/D Converter with Sample-and-Hold |
| 中文描述： | 動態息審查自校準12位帶符號的A / D轉換器的采樣保持電路 |
| 文件頁數： | 16/18頁 |
| 文件大小： | 311K |
| 代理商： | ADC12451883 |
4.0 Dynamic Performance
(Continued)
Effective number of bits can also be useful in describing the
A/D’s noise performance. An ideal A/D converter will have
some amount of quantization noise, determined by its reso-
lution, which will yield an optimum S/N ratio given by the
following equation:
S/N
e
(6.02
c
n
a
1.8) dB
where n is the A/D’s resolution in bits.
The effective bits of a real A/D converter, therefore, can be
found by:
n(effective)
e
S/N(dB)
b
1.8
6.02
As an example, an ADC12451 with a
g
5V, 10 kHz sine
wave input signal will typically have a S/N of 78 dB, which is
equivalent to 12.6 effective bits.
Two sample/hold specifications, aperture time and aperture
jitter, are included in the Dynamic Characteristics table
since the ADC12451 has the ability to track and hold the
analog input voltage. Aperture time is the delay for the A/D
to respond to the hold command. In the case of the
ADC12451, the hold command is internally generated.
When the Auto-Zero function is not being used, the hold
command occurs at the end of the acquisition window, or
seven clock periods after the rising edge of the WR. The
delay between the internally generated hold command and
the time that the ADC12451 actually holds the input signal is
the aperture time. For the ADC12451, this time is typically
100 ns. Aperture jitter is the change in the aperture time
from sample to sample. Aperture jitter is useful in determin-
ing the maximum slew rate of the input signal for a given
accuracy. For example, an ADC12451 with 100 ps of aper-
ture jitter operating with a 5V reference can have an effec-
tive gain variation of about 1 LSB with an input signal whose
slew rate is 12 V/
m
s.
5.0 Typical Applications
Power Supply Bypassing
TL/H/11025–24
Protecting the Analog Inputs
TL/H/11025–25
Note:
External protection diodes should be able to withstand the op amp current limit.
16
相關PDF資料 |
PDF描述 |
|---|---|
| ADC12451 | Dynamically-Tested Self-Calibrating 12-Bit Plus Sign A/D Converter with Sample-and-Hold(可自行校對的12位帶采樣和保持功能的A/D轉換器) |
| ADC12451CMJ | Low Dropout Linear 1-cell Li-Ion Charge Controller with AutoCompTM, 4.1V 8-TSSOP -20 to 70 |
| ADC12451CIJ | Dynamically-Tested Self-Calibrating 12-Bit Plus Sign A/D Converter with Sample-and-Hold |
| ADC1251BIJ | Self-Calibrating 12-Bit Plus Sign A/D Converter with Sample-and-Hold |
| ADC1251CMJ | Self-Calibrating 12-Bit Plus Sign A/D Converter with Sample-and-Hold |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADC12451CIJ | 功能描述:IC ADC 12BIT DYNAM TEST 24CDIP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:12 采樣率（每秒）:3M 數據接口:- 轉換器數目:- 功率耗散（最大）:- 電壓電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-23-6 包裝:帶卷 (TR) 輸入數目和類型:- |
| ADC12451CMJ | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:Dynamically-Tested Self-Calibrating 12-Bit Plus Sign A/D Converter with Sample-and-Hold |
| ADC12451CMJ/883 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog-to-Digital Converter， 13-Bit |
| ADC-12-4-75 | 制造商:MINI 制造商全稱:Mini-Circuits 功能描述:Directional Coupler 75Ω 20 to 1000 MHz |
| ADC-12-4-75+ | 制造商:MINI 制造商全稱:Mini-Circuits 功能描述:Directional Coupler 75Ω 20 to 1000 MHz |
發布緊急采購，3分鐘左右您將得到回復。