參數資料
型號: AT89LP428-20PU
廠商: Atmel
文件頁數: 112/149頁
文件大?。?/td> 0K
描述: MCU 8051 4K FLASH SPI 28PDIP
產品培訓模塊: MCU Product Line Introduction
標準包裝: 14
系列: 89LP
核心處理器: 8051
芯體尺寸: 8-位
速度: 20MHz
連通性: SPI,UART/USART
外圍設備: 欠壓檢測/復位,POR,PWM,WDT
輸入/輸出數: 30
程序存儲器容量: 4KB(4K x 8)
程序存儲器類型: 閃存
EEPROM 大?。?/td> 512 x 8
RAM 容量: 768 x 8
電壓 - 電源 (Vcc/Vdd): 2.4 V ~ 5.5 V
振蕩器型: 內部
工作溫度: -40°C ~ 85°C
封裝/外殼: 28-DIP(0.300",7.62mm)
包裝: 管件
65
3654A–MICRO–8/09
AT89LP428/828
13.2
Input Capture Mode
The Compare/Capture Array provides a variety of capture modes suitable for time-stamping
events or performing measurements of pulse width, frequency, slope, etc. The CCA channels
are configured for capture mode by clearing the CCMx bit in the associated CCCx register to 0.
Each time a capture event occurs, the contents of Timer 2 (TH2 and TL2) are transferred to the
16-bit data register of the corresponding channel, and the channel’s interrupt flag CCFx is set in
T2CCF. Optionally, the capture event may also clear Timer 2 to 0000H by setting the CTCx bit in
CCCx. The capture event is defined by the CxM
2-0 bits in CCCx and may be either externally or
internally generated. A diagram of a CCA channel in capture mode is shown in Figure 13-2.
Figure 13-2. CCA Capture Mode Diagram
Table 13-5.
T2CCF – Timer/Counter 2 Compare/Capture Flags
T2CCF Address = 0D5H
Reset Value = XXXX 0000B
Not Bit Addressable
CCFD
CCFC
CCFB
CCFA
Bit
7
654
321
0
Symbol
Function
CCFD
Channel D Compare/Capture Interrupt Flag. Set by a compare/capture event on channel D. Must be cleared by software.
CCFD will generate an interrupt when CIEND = 1 and ECC = 1.
CCFC
Channel C Compare/Capture Interrupt Flag. Set by a compare/capture event on channel C. Must be cleared by
software. CCFC will generate an interrupt when CIENC = 1 and ECC = 1.
CCFB
Channel B Compare/Capture Interrupt Flag. Set by a compare/capture event on channel B. Must be cleared by software.
CCFB will generate an interrupt when CIENB = 1 and ECC = 1.
CCFA
Channel A Compare/Capture Interrupt Flag. Set by a compare/capture event on channel A. Must be cleared by software.
CCFA will generate an interrupt when CIENA = 1 and ECC = 1.
TL2
TH2
CCxL
CCxH
CCCx
Interrupt
(P2.x) CCx
T2CCC
T2CCL
T2CCH
0
1
2
3
4
5
6
7
“0”
Timer 0 Overflow
Timer 1 Overflow
Comparator A
Comparator B
00H
CTCx
CCFx
CIENx
CxM2-0
相關PDF資料
PDF描述
AT89LP428-20JU MCU 8051 4K FLASH SPI 32PLCC
ATMEGA48V-10MU IC AVR MCU 4K 10MHZ 1.8V 32-QFN
ATMEGA48-20MU IC AVR MCU 4K 20MHZ 5V 32-QFN
ATMEGA48V-10AU IC AVR MCU 4K 10MHZ 1.8V 32TQFP
ATMEGA48-20AU IC AVR MCU 4K 20MHZ 5V 32TQFP
相關代理商/技術參數
參數描述
AT89LP51-20AU 功能描述:8位微控制器 -MCU Single Cycle 8051 4K ISP FL RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
AT89LP51-20JU 功能描述:8位微控制器 -MCU Single Cycle 8051 4K ISP FL RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
AT89LP51-20MU 功能描述:8位微控制器 -MCU Single Cycle 8051 4K ISP FL RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
AT89LP51-20PU 功能描述:8位微控制器 -MCU Single Cycle 8051 4K ISP FL RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
AT89LP51ED2-20AAU 功能描述:8位微控制器 -MCU 64KB 20MHz 2.4V-5.5V RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT