參數資料
型號: ATWEBDVK-02WC
廠商: Atmel
文件頁數: 55/137頁
文件大小: 0K
描述: KIT DEV TCP/IP AT89C51RD2 WEBCAM
標準包裝: 1
系列: @Web
主要目的: *
嵌入式: *
已用 IC / 零件: AT89C51RD2
主要屬性: *
次要屬性: *
已供物品: 板,帶網絡 Webcam 模塊和軟件
產品目錄頁面: 617 (CN2011-ZH PDF)
24
4235K–8051–05/08
AT89C51RD2/ED2
part of the available XRAM as explained in Table 9-1. This can be useful if external
peripherals are mapped at addresses already used by the internal XRAM.
With EXTRAM = 0, the XRAM is indirectly addressed, using the MOVX instruction in
combination with any of the registers R0, R1 of the selected bank or DPTR. An access to
XRAM will not affect ports P0, P2, P3.6 (WR) and P3.7 (RD). For example, with EXTRAM =
0, MOVX @R0, # data where R0 contains 0A0H, accesses the XRAM at address 0A0H
rather than external memory. An access to external data memory locations higher than the
accessible size of the XRAM will be performed with the MOVX DPTR instructions in the same
way as in the standard 80C51, with P0 and P2 as data/address busses, and P3.6 and P3.7
as write and read timing signals. Accesses to XRAM above 0FFH can only be done by the
use of DPTR.
With EXTRAM = 1, MOVX @Ri and MOVX @DPTR will be similar to the standard
80C51.MOVX @ Ri will provide an eight-bit address multiplexed with data on Port0 and any
output port pins can be used to output higher order address bits. This is to provide the
external paging capability. MOVX @DPTR will generate a sixteen-bit address. Port2 outputs
the high-order eight address bits (the contents of DPH) while Port0 multiplexes the low-order
eight address bits (DPL) with data. MOVX @ Ri and MOVX @DPTR will generate either read
or write signals on P3.6 (WR) and P3.7 (RD).
The stack pointer (SP) may be located anywhere in the 256 bytes RAM (lower and upper RAM)
internal data memory. The stack may not be located in the XRAM.
The M0 bit allows to stretch the XRAM timings; if M0 is set, the read and write pulses are
extended from 6 to 30 clock periods. This is useful to access external slow peripherals.
9.1
Registers
Table 9-1.
AUXR Register
AUXR - Auxiliary Register (8Eh)
7
6
5
4
3
2
1
0
DPU
-
M0
XRS2
XRS1
XRS0
EXTRAM
AO
Bit
Number
Bit
Mnemonic
Description
7
DPU
Disable Weak Pull-up
Cleared by software to activate the permanent weak pull-up (default)
Set by software to disable the weak pull-up (reduce power consumption)
6
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
5
M0
Pulse length
Cleared to stretch MOVX control: the RD and the WR pulse length is 6 clock periods
(default).
Set to stretch MOVX control: the RD and the WR pulse length is 30 clock periods.
4
XRS2
XRAM Size
XRS2XRS1XRS0XRAM size
0
0256 bytes
0
1
512 bytes
0
1
0768 bytes(default)
0
1
11024 bytes
1
0
01792 bytes
3
XRS1
2
XRS0
相關PDF資料
PDF描述
VRE210MA IC VREF SERIES PREC 10V 20-CLCC
VRE204M IC VREF SERIES PREC 4.5V 20-CLCC
ATWEBDVK-02VOIP KIT DEV TCP/IP AT89C51RD2 VOIP
A3DDB-1018G IDC CABLE- AKR10B/AE10G/AKR10B
V24C12E150BL3 CONVERTER MOD DC/DC 12V 150W
相關代理商/技術參數
參數描述
ATWEBEVK-01 功能描述:KIT EVAL TCP/IP AT89C51AC2 RoHS:否 類別:編程器,開發系統 >> 評估演示板和套件 系列:@Web 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- 主要目的:電源管理,電池充電器 嵌入式:否 已用 IC / 零件:MAX8903A 主要屬性:1 芯鋰離子電池 次要屬性:狀態 LED 已供物品:板
ATWEBEVK-02 功能描述:KIT SOFTWARE EVAL FOR T89C51CC01 制造商:microchip technology 系列:- 零件狀態:停產 主要用途:接口,以太網 嵌入式:- 使用的 IC/零件:- 主要屬性:- 輔助屬性:- 所含物品:板 標準包裝:1
ATWEBEVK-05 功能描述:KIT EVAL MODULE RS232 TO TCP/IP RoHS:否 類別:編程器,開發系統 >> 評估演示板和套件 系列:@Web 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- 主要目的:電源管理,電池充電器 嵌入式:否 已用 IC / 零件:MAX8903A 主要屬性:1 芯鋰離子電池 次要屬性:狀態 LED 已供物品:板
ATWEBEVK-06 功能描述:BOARD EVAL FOR CAN-ETHERNET MOD RoHS:否 類別:編程器,開發系統 >> 評估演示板和套件 系列:@Web 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- 主要目的:電源管理,電池充電器 嵌入式:否 已用 IC / 零件:MAX8903A 主要屬性:1 芯鋰離子電池 次要屬性:狀態 LED 已供物品:板
ATWEBSEG-32 功能描述:MODULE RS232 TO TCP/IP RoHS:否 類別:編程器,開發系統 >> 過時/停產零件編號 系列:- 標準包裝:1 系列:- 類型:MCU 適用于相關產品:Freescale MC68HC908LJ/LK(80-QFP ZIF 插口) 所含物品:面板、纜線、軟件、數據表和用戶手冊 其它名稱:520-1035