參數資料
型號： HN29W6484DH08TE
廠商： Hitachi,Ltd.
英文描述： Controller for AND Flash Memory(AND型閃速存儲器控制器)
中文描述： 控制器及快閃記憶體（及型閃速存儲器控制器）
文件頁數： 46/74頁
文件大小： 251K
代理商： HN29W6484DH08TE
HN29W6484DH08TE-1
46
9. Read Buffer (code: E4H): This command enables the host to read the current contents of the card's sector
buffer.
10. Read Multiple (code: C4H): This command performs similarly to the Read Sectors command.
Interrupts are not generated on each sector, but on the transfer of a block which contains the number of
sectors defined by a Set Multiple command.
11. Read Long Sector (code: 22H or 23H): This command performs similarly to the Read Sector(s)
command except that it returns 516 bytes of data instead of 512 bytes.
12. Read Sector(s) (code: 20H, 21H): This command reads from 1 to 256 sectors as specified in the Sector
Count register. A sector count of 0 requests 256 sectors. The transfer begins at the sector specified in the
Sector Number register.
13. Read Verify Sector(s) (code: 40H or 41H): This command is identical to the Read Sectors command,
except that DRQ is never set and no data is transferred to the host .
14. Recalibrate (code: 1XH): This command is effectively a NOP command to the Card and is provided for
compatibility purposes.
15. Request Sense (code: 03H): This command requests an extended error code after command ends with an
error.
16. Seek (code: 7XH): This command is effectively a NOP command to the Card although it does perform a
range check.
17. Set Features (code: EFH): This command is used by the host to establish or select certain features.
Feature
Operation
01H
Enable 8-bit data transfers.
55H
Disable Read Look Ahead.
66H
Disable Power on Reset (POR) establishment of defaults at Soft Reset.
81H
Disable 8-bit data transfers.
BBH
4 bytes of data apply on Read/Write Long commands.
CCH
Enable Power on Reset (POR) establishment of defaults at Soft Reset.
18. Set Multiple Mode (code: C6H): This command enables the Card to perform Read and Write Multiple
operations and establishes the block count for these commands.
19. Set Sleep Mode (code: E6H or 99H): This command causes the Card to set BSY, enter the Sleep mode,
clear BSY and generate an interrupt.
20. Stand By (code: E2H or 96H): This command causes the Card to set BSY, enter the Sleep mode (which
corresponds to the ATA "Standby" Mode), clear BSY and return the interrupt immediately.
21. Stand By Immediate (code: E0H or 94H): This command causes the Card to set BSY, enter the Sleep
mode(which corresponds to the ATA "Standby" Mode), clear BSY and return the interrupt immediately.
相關PDF資料
PDF描述
HN29WB800 1048576-word x 8-bit / 524288-word x 16-bit CMOS Flash Memory
HN29WT800 1048576-word x 8-bit / 524288-word x 16-bit CMOS Flash Memory
HN462532 4096-word X 8-bit UV Erasable and Programmable Read Only Memory
HN462716 2048-WORD x 8-BIT UV ERASABLE AND ELECTRICALLY PROGRAMMABLE ONLY MEMORY
HN462716G 2048-WORD x 8-BIT UV ERASABLE AND ELECTRICALLY PROGRAMMABLE ONLY MEMORY
相關代理商/技術參數
參數描述
HN29W64AH05TE-1 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MEMORY CONTROLLER
HN29W8411SERIES 制造商:未知廠家 制造商全稱:未知廠家 功能描述:AND Flash EEPROM
HN29WB800 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:1048576-word x 8-bit / 524288-word x 16-bit CMOS Flash Memory
HN29WB800FP-10 制造商:未知廠家 制造商全稱:未知廠家 功能描述:x8/x16 Flash EEPROM
HN29WB800FP-12 制造商:未知廠家 制造商全稱:未知廠家 功能描述:x8/x16 Flash EEPROM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*