參數資料
型號： ICS1894KI-40LFT
廠商： IDT, Integrated Device Technology Inc
文件頁數： 50/53頁
文件大?。?/td> 0K
描述： PHYCEIVER LOW PWR 3.3V 40QFN
標準包裝： 1
系列： PHYceiver™
類型： PHY 收發器
規程： MII，RMII
電源電壓： 3.14 V ~ 3.47 V
安裝類型： 表面貼裝
封裝/外殼： 40-VFQFN 裸露焊盤
供應商設備封裝： 40-VFQFPN（6x6）
包裝： 標準包裝
其它名稱： 800-2032-6
ICS1894-40
10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE
PHYCEIVER
IDT 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE
6
ICS1894-40
REV K 022412
The ICS1894-40 implements the OSI model’s physical
layer, consisting of the following, as defined by the ISO/IEC
8802-3 standard:
Physical Coding sublayer (PCS)
Physical Medium Attachment sublayer (PMA)
Physical Medium Dependent sublayer (PMD)
Auto-Negotiation sublayer
The ICS1894-40 is transparent to the next layer of the OSI
model, the link layer. The link layer has two sublayers: the
Logical Link Control sublayer and the MAC sublayer. The
ICS1894-40 can interface directly with the MAC via MII/RMII
interface signals.
The ICS1894-40 transmits framed packets acquired from its
MAC Interface and receives encapsulated packets from
another PHY, which it translates and presents to its MAC
Interface.
Note:
As per the ISO/IEC standard, the
ICS1894-40 does not affect, nor is it
affected by, the underlying structure of the
MAC frame it is conveying.
100Base-TX Operation
During 100Base-TX data transmission, the ICS1894-40
accepts packets from the MAC and inserts Start-of-Stream
Delimiters (SSDs) and End-of-Stream Delimiters (ESDs)
into the data stream. The ICS1894-40 encapsulates each
MAC frame, including the preamble, with an SSD and an
ESD. As per the ISO/IEC Standard, the ICS1894-40
replaces the first octet of each MAC preamble with an SSD
and appends an ESD to the end of each MAC frame.
When receiving data from the medium, the ICS1894-40
removes each SSD and replaces it with the pre-defined
preamble pattern before presenting the data on the MAC
Interface. When the ICS1894-40 encounters an ESD in the
received data stream, signifying the end of the frame, it ends
the presentation of data on the MAC Interface. Therefore,
the local MAC receives an unaltered copy of the transmitted
frame sent by the remote MAC.
During periods when MAC frames are being neither
transmitted nor received, the ICS1894-40 signals and
detects the IDLE condition on the Link Segment. In the
100Base-TX mode, the ICS1894-40 transmit channel sends
a continuous stream of scrambled ones to signify the IDLE
condition. Similarly, the ICS1894-40 receive channel
continually monitors its data stream and looks for a pattern
of scrambled ones. The results of this signaling and
monitoring provide the ICS1894-40 with the means to
establish the integrity of the Link Segment between itself
and its remote link partner and inform its Station
Management Entity (SME) of the link status.
10Base-T Operation
During 10Base-T data transmission, the ICS1894-40 inserts
only the IDL delimiter into the data stream. The ICS1894-40
appends the IDL delimiter to the end of each MAC frame.
However, since the 10Base-T preamble already has a
Start-of-Frame delimiter (SFD), it is not required that the
ICS1894-40 insert an SSD-like delimiter.
When receiving data from the medium (such as a
twisted-pair cable), the ICS1894-40 uses the preamble to
synchronize its receive clock. When the ICS1894-40
receive clock establishes lock, it presents the preamble
nibbles to the MAC Interface.
In 10M operations, during periods when MAC frames are
being neither transmitted nor received, the ICS1894-40
signals and detects Normal Link Pulses. This action allows
the integrity of the Link Segment with the remote link partner
to be established and then reported to the ICS1894-40’s
SME.
Auto-Negotiation
The ICS1894-40 conforms to the auto-negotiation protocol,
defined in Clause 28 of the IEEE 802.3u specification.
Autonegotiation is enabled by either hardware pin strapping
(pin 20) or software (register 0h bit 12).
Auto-negotiation allows link partners to select the highest
common mode of operation. Link partners advertise their
capabilities to each other, and then compare their own
capabilities with those they received from their link partners.
The highest speed and duplex setting that is common to the
two link partners is selected as the mode of operation.
The following list shows the speed and duplex operation
mode from highest to lowest.
Priority 1: 100Base-TX, full-duplex
Priority 2: 100Base-TX, half-duplex
Priority 3: 10Base-T, full-duplex
Priority 4: 10Base-T, half-duplex
相關PDF資料
PDF描述
ID82C55A IC I/O EXPANDER 24B 40DIP
ID82C82 IC DRIVER BUS OCT LATCHING 20DIP
ID82C86H IC TRANSCEIVER OCT BUS 20-DIP
IDT5V5201DCGI TXRX 1CH M-LVDS TO LVTTL 8-SOIC
IDT5V5206DCGI TXRX 1CH M-LVDS TO LVTTL 8-SOIC
相關代理商/技術參數
參數描述
ICS1894KI-43LFT 制造商:Integrated Device Technology Inc 功能描述:PHYCEIVER LOW PWR 3.3V 40QFN
ICS200 制造商:ICS 制造商全稱:ICS 功能描述:SMPTE Time Code Receiver/Generator
ICS2001M 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Digital-to-Analog Converter
ICS2001N 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-Bit Digital-to-Analog Converter
ICS2002 制造商:ICS 制造商全稱:ICS 功能描述:Wavedec Digital Audio Codec
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*