參數資料
型號： KSZ8842-32MVLI
廠商： Micrel Inc
文件頁數： 10/141頁
文件大?。?/td> 0K
描述： IC SWITCH ETH 2P 32BIT 128LQFP
標準包裝： 90
控制器類型： 以太網開關控制器
接口： PCI
電源電壓： 3.1 V ~ 3.5 V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 128-LQFP
供應商設備封裝： 128-LQFP（14x14）
包裝： 托盤
產品目錄頁面： 1081 (CN2011-ZH PDF)
配用： 576-1635-ND - BOARD EVALUATION KSZ8842-16MVL
其它名稱： 576-3270
Micrel, Inc.
KSZ8842-16/32 MQL/MVL/MVLI/MBL
October 2007
107
M9999-102207-1.9
Bank 49 Port 1 Control Register 4 (0x02): P1CR4
This register contains the global per port control for the switch function.
Bit
Default
R/W
Description
Bit is same as:
15
0
RW
LED Off
1 = Turn off all of the port 1 LEDs (P1LED3,
P1LED2, P1LED1, P1LED0). These pins are driven
high if this bit is set to one.
0 = normal operation.
Bank 45 0x00 bit 0
14
0
RW
Txids
1 = disable the port’s transmitter.
0 = normal operation.
Bank 45 0x00 bit1
13
0
RW
Restart AN
1 = restart auto-negotiation.
0 = normal operation.
Bank 45 0x00 bit 9
12
0
RW
Reserved
Bank 45 0x00 bit 2
11
0
RW
Power Down
1 = power down.
0 = normal operation.
Bank 45 0x00 bit 11
10
0
RW
Disable auto MDI/MDI-X
1 = disable auto MDI/MDI-X function.
0 = enable auto MDI/MDI-X function.
Bank 45 0x00 bit 3
9
0
RW
Force MDI-X
1= if auto MDI/MDI-X is disabled, force PHY into
MDI-X mode.
0 = do not force PHY into MDI-X mode.
Bank 45 0x00 bit 4
8
0
RW
Far-End Loopback
1 = perform loopback, as indicated:
Start: RXP2/RXM2 (port 2).
Loopback: PMD/PMA of port 1’s PHY.
End: TXP2/TXM2 (port 2).
0 = normal operation.
Bank 45 0x00 bit 14
7
1
RW
Auto Negotiation Enable
1 = auto negotiation is enabled.
0 = disable auto negotiation, speed, and duplex are
decided by bits 6 and 5 of the same register.
Bank 45 0x00 bit 12
6
0
RW
Force Speed
1 = force 100BT if AN is disabled (bit 7).
0 = force 10BT if AN is disabled (bit 7).
Bank 45 0x00 bit 13
5
0
RW
Force Duplex
1 = force full duplex if (1) AN is disabled or (2) AN is
enabled but failed.
0 = force half duplex if (1) AN is disabled or (2) AN
is enabled but failed.
Bank 45 0x00 bit 8
4
1
RW
Advertised flow control capability.
1 = advertise flow control (pause) capability.
0 = suppress flow control (pause) capability from
transmission to link partner.
Bank 45 0x08 bit 10
相關PDF資料
PDF描述
KSZ8842-PMBL AM TR IC ETHERNET SW 2PORT 100LFBGA
KSZ8842-PMQLI IC ETHERNET SW 2PORT PCI 128PQFP
KSZ8851-16MLLI TR IC MAC CTLR 1PORT W/BUS 48LQFP
KSZ8851-16MLLJ IC CTLR MAC 1PORT NON-PCI 48LQFP
KSZ8851-32MQLI IC CTLR MAC/PHY NON PCI 128PQFP
相關代理商/技術參數
參數描述
KSZ8842-MQL 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:2-Port Ethernet Switch with Non-PCI Interface
KSZ8842P 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:2-Port Ethernet Switch with PCI Interface
KSZ8842-PMBL 功能描述:以太網 IC 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI bus interface (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8842-PMBL AM 功能描述:以太網 IC 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI bus interface(Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8842-PMBL AM TR 功能描述:以太網 IC 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI bus interface(Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*