參數資料
型號: KSZ8842-32MVLI
廠商: Micrel Inc
文件頁數: 110/141頁
文件大小: 0K
描述: IC SWITCH ETH 2P 32BIT 128LQFP
標準包裝: 90
控制器類型: 以太網開關控制器
接口: PCI
電源電壓: 3.1 V ~ 3.5 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 128-LQFP
供應商設備封裝: 128-LQFP(14x14)
包裝: 托盤
產品目錄頁面: 1081 (CN2011-ZH PDF)
配用: 576-1635-ND - BOARD EVALUATION KSZ8842-16MVL
其它名稱: 576-3270
Micrel, Inc.
KSZ8842-16/32 MQL/MVL/MVLI/MBL
October 2007
70
M9999-102207-1.9
Bank 18 Interrupt Status Register (0x02): ISR
This register contains the status bits for all QMU and other interrupt sources.
When the corresponding enable bit is set, it causes the interrupt pin to be asserted.
This register is usually read by the host CPU and device drivers during interrupt service routine or polling. The register bits
are not cleared when read. The user has to write “1” to clear
Bit
Default Value
R/W
Description
15
0x0
RO
(W1C)
LCIS Link Change Interrupt Status
When this bit is set, it indicates that the link status has changed from link up to link
down, or link down to link up.
This edge-triggered interrupt status is cleared by writing 1 to this bit.
14
0x0
RO
(W1C)
TXIS Transmit Status
When this bit is set, it indicates that the TXQ MAC has transmitted at least a frame on
the MAC interface and the QMU TXQ is ready for new frames from the host.
This edge-triggered interrupt status is cleared by writing 1 to this bit.
13
0x0
RO
(W1C)
RXIS Receive Interrupt Status
When this bit is set, it indicates that the QMU RXQ has received a frame from the
MAC interface and the frame is ready for the host CPU to process.
This edge-triggered interrupt status is cleared by writing 1 to this bit.
12
0x0
RO
Reserved
11
0x0
RO
(W1C)
RXOIS Receive Overrun Interrupt Status
When this bit is set, it indicates that the Receive Overrun status has occurred.
This edge-triggered interrupt status is cleared by writing 1 to this bit.
10
0x0
RO
Reserved
9
0x1
RO
(W1C)
TXPSIE Transmit Process Stopped Status
When this bit is set, it indicates that the Transmit Process has stopped.
This edge-triggered interrupt status is cleared by writing 1 to this bit.
8
0x1
RO
(W1C)
RXPSIE Receive Process Stopped Status
When this bit is set, it indicates that the Receive Process has stopped.
This edge-triggered interrupt status is cleared by writing 1 to this bit.
7
0x0
RO
(W1C)
RXEFIE Receive Error Frame Interrupt Status
When this bit is set, it indicates that the Receive error frame status has occurred.
This edge-triggered interrupt status is cleared by writing 1 to this bit.
6-0
-
RO
Reserved
相關PDF資料
PDF描述
KSZ8842-PMBL AM TR IC ETHERNET SW 2PORT 100LFBGA
KSZ8842-PMQLI IC ETHERNET SW 2PORT PCI 128PQFP
KSZ8851-16MLLI TR IC MAC CTLR 1PORT W/BUS 48LQFP
KSZ8851-16MLLJ IC CTLR MAC 1PORT NON-PCI 48LQFP
KSZ8851-32MQLI IC CTLR MAC/PHY NON PCI 128PQFP
相關代理商/技術參數
參數描述
KSZ8842-MQL 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:2-Port Ethernet Switch with Non-PCI Interface
KSZ8842P 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:2-Port Ethernet Switch with PCI Interface
KSZ8842-PMBL 功能描述:以太網 IC 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI bus interface (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8842-PMBL AM 功能描述:以太網 IC 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI bus interface(Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8842-PMBL AM TR 功能描述:以太網 IC 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI bus interface(Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray