參數資料
型號： KSZ8893FQL
廠商： Micrel Inc
文件頁數： 82/117頁
文件大小： 0K
描述： IC SWITCH FAST ETH 3PORT 128PQFP
標準包裝： 66
控制器類型： 以太網開關控制器
接口： MII，RMII，SNI
電源電壓： 3.1 V ~ 3.5 V
工作溫度： 0°C ~ 70°C
安裝類型： 表面貼裝
封裝/外殼： 128-BFQFP
供應商設備封裝： 128-PQFP（14x20）
包裝： 托盤
配用： 576-1603-ND - EVAL KIT EXPERIMENTAL KSZ8893MQL
其它名稱： 576-1565
Micrel, Inc.
KSZ8893FQL
October 2007
67
M9999-101607-1.3
Port Registers
The following registers are used to enable features that are assigned on a per port basis. The register bit assignments
are the same for all ports, but the address for each port is different, as indicated.
Register 16 (0x10): Port 1 Control 0
Register 32 (0x20): Port 2 Control 0
Register 48 (0x30): Port 3 Control 0
Bit
Name
R/W
Description
Default
7
Broadcast Storm
Protection Enable
R/W
1 = Enable broadcast storm protection for ingress packets on
port
0 = Disable broadcast storm protection
0
6
DiffServ Priority
Classification Enable
R/W
1 = Enable DiffServ priority classification for ingress packets
(IPv4 and IPv6) on port
0 = Disable DiffServ function
0
5
802.1p Priority
Classification Enable
R/W
1 = Enable 802.1p priority classification for ingress packets on
port
0 = Disable 802.1p
0
4-3
Port-based Priority
Classification
R/W
00 = Ingress packets on port will be classified as priority 0
queue if “Diffserv” or “802.1p” classification is not enabled or
fails to classify.
01 = Ingress packets on port will be classified as priority 1
queue if “Diffserv” or “802.1p” classification is not enabled or
fails to classify.
10 = Ingress packets on port will be classified as priority 2
queue if “Diffserv” or “802.1p” classification is not enabled or
fails to classify.
11 = Ingress packets on port will be classified as priority 3
queue if “Diffserv” or “802.1p” classification is not enabled or
fails to classify.
Note: “DiffServ”, “802.1p” and port priority can be enabled at
the same time. The OR’ed result of 802.1p and DSCP
overwrites the port priority.
00
2
Tag Insertion
R/W
1 = When packets are output on the port, the switch will add
802.1p/q tags to packets without 802.1p/q tags when received.
The switch will not add tags to packets already tagged. The
tag inserted is the ingress port’s “port VID”.
0 = Disable tag insertion
0
1
Tag Removal
R/W
1 = When packets are output on the port, the switch will
remove 802.1p/q tags from packets with 802.1p/q tags when
received. The switch will not modify packets received without
tags.
0 = Disable tag removal
0
TX Multiple Queues
Select Enable
R/W
1 = The port output queue is split into four priority queues.
0 = Single output queue on the port. There is no priority
differentiation even though packets are classified into high or
low priority.
0
相關PDF資料
PDF描述
KSZ8895MQI IC ETHERNET SWITCH 5PORT 128PQFP
KSZ8895MQ IC ETHERNET SW 5PORT 128-PQFP
KSZ8993FL IC CONV MED 10/100 SGL 128PQFP
KSZ8993MLI IC SWITCH 10/100 3PORT 128-PQFP
KSZ8993ML IC SWITCH 10/100 W/TXRX 128PQFP
相關代理商/技術參數
參數描述
KSZ8893FQL-EVAL 功能描述:以太網開發工具 2+1 Port 10/100 Switch w/Tranceivers & Frame Buffers - Evaluation Board RoHS:否 制造商:Micrel 產品:Evaluation Boards 類型:Ethernet Transceivers 工具用于評估:KSZ8873RLL 接口類型:RMII 工作電源電壓:
KSZ8893FQL-FX 功能描述:以太網 IC 2+1 Port 10/100 Switch w/Tranceivers & Frame Buffers, (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8893FQLI-FX 功能描述:以太網 IC 3-Port Ethernet Switch w MII/RMII Interface + 100FX (I-Temp, Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8893MBL 功能描述:以太網 IC 2+1 Port 10/100 Switch w/Tranceivers & Frame Buffers, 128-Ld PQFP(Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8893MBL TR 功能描述:以太網 IC 2+1 Port 10/100 Switch w/Tranceivers & Frame Buffers, 100-Ball LFBGA (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*