參數資料
型號： LU6612
廠商： Lineage Power
英文描述： Single-FET for 10Base-T/100Base-TX(應用于10基數-T和100基數-TX 的單快速以太網收發器)
中文描述： 單為10BASE-T/100BASE-TX快速以太網場效應晶體管（應用于10基數- T的和100基數，得克薩斯州的單快速以太網收發器）
文件頁數： 21/36頁
文件大?。?/td> 528K
代理商： LU6612
Lucent Technologies Inc.
21
Data Sheet
July 2000
LU6612
FASTCAT Single-FET for 10Base-T/100Base-TX
MII Station Management
(continued)
Table 18. MR29—Device-Specific Register 2 (100 Mbits/s Control) Bit Descriptions
1. Note that the format for the pin descriptions is as follows: the first number is the register number, the second number is the bit position in the
register, and the name of the instantiated pad is in capital letters.
2. R = read, W = write.
Bit
1
Type
2
R/W
Description
29.15 (LOCALRST)
Management Reset.
This is the local management reset bit. Writing a logic 1 to
this bit will cause the lower 16 registers and registers 28 and 29 to be reset to
their default values. This bit is self-clearing. The default is 0.
Generic Reset 1.
This register is used for manufacture test only. The default is 0.
Generic Reset 2.
This register is used for manufacture test only. The default is 0.
100 Mbits/s Transmitter Off.
When this bit is set to 0, it forces RX low and RY
high. This bit defaults to 1.
Reserved.
Program to zero.
Carrier Sense Select.
CRS will be asserted on receive only when this bit is set to
a 1. If this bit is set to logic 0, CRS will be asserted on receive or transmit. The
default is 0.
Link Error Indication.
When this bit is a 1, a link error code will be reported on
RXD[3:0] of the LU6612 when RX_ER is asserted on the MII. The specific error
codes are listed in the RXD pin description. If it is 0, it will disable this function.
The default is 0.
Packet Error Indication Enable.
When this bit is a 1, a packet error code, which
indicates that the scrambler is not locked, will be reported on RXD[3:0] of the
LU6612 when RX_ER is asserted on the MII. When this bit is 0, it will disable this
function. The default is 0.
Reserved.
This bit must remain as a zero. The default is 0.
Encoder/Decoder Bypass.
When this bit is set to 1, the 4B/5B encoder and
5B/4B decoder function will be disabled. The default is a zero. At powerup/reset, if
PCSEN
is strapped low, then this bit is set to a 1. The default is 0.
Symbol Aligner Bypass.
When this bit is set to 1, the aligner function will be dis-
abled. The default is 0.
Scrambler/Descrambler Bypass.
When this bit is set to 1, the scrambling/
descrambling functions will be disabled. The default is a zero. At powerup/reset, if
PCSEN
is strapped low, then this bit is set to a 1. The default is 0.
Carrier Integrity Enable.
When this bit is set to a 1, carrier integrity is enabled.
(This function is not supported by QS6611.) The default is 0.
Jam Enable.
When this bit is a 1, it enables JAM associated with carrier integrity
to be ORed with COL. The default is 0.
Reserved.
This bit must remain as a zero. The default is 0.
Reserved.
This bit must remain as a zero. The default is 0.
29.14 (RST1)
29.13 (RST2)
29.12 (100OFF)
R/W
R/W
R/W
29.11
R/W
R/W
29.10 (CRS_SEL)
29.9 (LINK_ERR)
R/W
29.8 (PKT_ERR)
R/W
29.7 (RESERVED)
29.6 (EDB)
R/W
R/W
29.5 (SAB)
R/W
29.4 (SDB)
R/W
29.3 (CARIN_EN)
R/W
29.2 (JAM_COL)
R/W
29.1 (RESERVED)
29.0 (RESERVED)
R/W
R/W
相關PDF資料
PDF描述
LU6X14FT Telecommunication IC
LU97 Telecommunication IC
LUC3X01 LAN Transceiver
LUCDA4044 Phase Frequency Detector
LUCDA4044AAPE HEADER, SMC VERT 4WAY
相關代理商/技術參數
參數描述
LU6612-T64-DB 制造商:AGERE 制造商全稱:AGERE 功能描述:LU6612 FASTCAT TM Single-FET for 10Base-T/100Base-TX
LU67 制造商:Thomas & Betts 功能描述:2 CONDUIT BODY,GRAY IRON,LU,F-7
LU670Z 制造商:SEOUL 制造商全稱:Seoul Semiconductor 功能描述:GREEN OVAL LAMP LED
LU671 制造商:SEOUL 制造商全稱:Seoul Semiconductor 功能描述:RED OVAL LAMP LED
LU680Z 制造商:SEOUL 制造商全稱:Seoul Semiconductor 功能描述:GREEN OVAL LAMP LED
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*