參數資料
型號： MB90F897S
廠商： Fujitsu Limited
英文描述： 10-Bit Buffers/Drivers With 3-State Outputs 28-LCCC -55 to 125
中文描述： 16位微控制器專有
文件頁數： 48/78頁
文件大?。?/td> 746K
代理商： MB90F897S
MB90895 Series
48
11. UART0/UART1 Outline
UART0/UART1 are general-purpose serial data communication interface for synchronous and asynchronous
communication using external devices.
Provided with bi-directional communication function for both clock-synchronous and clock-asynchronous
modes.
Provided with master/slave communication function (multi-processor mode). (Only master side is available.)
Interrupt request is generated upon completion of reception, completion of transmission and detection of
reception error.
Ready for expanded intelligent service, EI
2
OS.
UART functions
Note : Start/stop bit is not added upon clock-synchronous transmission. Data only is transmitted.
UART0/UART1 operation modes
: Disallowed
*1 : “+1” is an address/data selection bit used for communication control (bit 11 of SCR1 register: A/D).
*2 : Only 1 bit is detected as a stop bit on data reception.
Description
Data buffer
Full-duplex double buffer
Transmission mode
Clock synchronous (No start/stop bit, no parity bit)
Clock asynchronous (start-stop synchronous)
Baud rate
Built-in special-purpose baud-rate generator. Setting is selectable
among 8 values.
Input of external values is allowed.
Use of clock from external timer (16-bit reload timer 0) is allowed.
Data length
7 bits (only asynchronous normal mode)
8 bits
Signaling system
Non Return to Zero (NRZ) system
Reception error detection
Framing error
Overrun error
Parity error (not detectable in operation mode 1 (multi-processor
mode))
Interrupt request
Receive interrupt (reception completed, reception error detected)
Transmission interrupt (transmission completed)
Ready for expanded intelligent I/O service (EI
2
OS) in both transmis-
sion and reception
Master/slave communication function
(asynchronous, multi-processor mode)
Communication between 1 (master) and n (slaves) are available
(usable as master only).
Operation mode
Data length
Synchronization
Stop bit length
With parity
Without parity
0
Asynchronous mode
(normal mode)
7-bit or 8-bit
Asynchronous
1- bit or 2-bit *
2
1
Multi processor mode
8+1
*1
Asynchronous
2
Synchronous mode
8
Synchronous
No
相關PDF資料
PDF描述
MB90F897SPMT 10-Bit Buffers/Drivers With 3-State Outputs 24-CDIP -55 to 125
MB90M405 Octal Edge-Triggered D-type Flip-Flops With Clear 20-CFP -55 to 125
MB90M407 Octal Edge-Triggered D-type Flip-Flops With Clear 20-LCCC -55 to 125
MB90M408 Octal Edge-Triggered D-type Flip-Flops With Clear 20-CDIP -55 to 125
MB90MV405 F2MC-16LX FAMILY 16-BIT MICROCONTROLLERS HARDWARE MANUAL ABSTRACTS
相關代理商/技術參數
參數描述
MB90F897SPMCR-GSE1 制造商:FUJITSU 功能描述: 制造商:FUJITSU 功能描述:MCU 16BIT 16LX 64K FLASH 48LQFP 制造商:FUJITSU 功能描述:MCU, 16BIT, 16LX, 64K FLASH, 48LQFP 制造商:FUJITSU 功能描述:IC, 16BIT MCU, F2MC-16LX, 16MHZ, LQFP-48, Controller Family/Series:F2MC-16LX, Core Size:16bit, No. of I/O's:36, Supply Voltage Min:3.5V, Supply Voltage Max:5.5V, Digital IC Case Style:LQFP, No. of Pins:48, Program Memory Size:64KB , RoHS Compliant: Yes 制造商:FUJITSU 功能描述:MCU, 16BIT, 16LX, 64K FLASH, 48LQFP, Controller Family/Series:F2MC-16LX, Core Si
MB90F947APFR-GS-SPE1 制造商:FUJITSU 功能描述:
MB90F962SPMCR-GE1 制造商:FUJITSU 功能描述:IC MCU 16BIT 16LX 48LQFP
MB90F962SPMCR-G-JNE1 制造商:FUJITSU 功能描述:
MB90V340A-102CR 制造商:FUJITSU 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*