參數資料
型號: MC3110
廠商: Electronic Theatre Controls, Inc.
英文描述: Pilot⑩ Motion Processor
中文描述: 試點⑩運動處理器
文件頁數: 64/81頁
文件大?。?/td> 1078K
代理商: MC3110
MC3110 Technical Specifications
64
7.3
RS 422/485 Serial Interface
The interface between the MC3110 chip and an RS-422/485 serial port is shown in the following
figure.
Comments on Schematic
Use the included table to determine the jumper setup that matches the chosen configuration. If
using RS485, the last CP must have its jumpers set to RS485 LAST. The DB9 connector wiring is
for example only. The DB9 should be wired according to the specification that accompanies the
connector to which it is attached.
For correct operation, logic should be provided that contains the start up serial configuration for the
motion processor. Refer to the RS232 Serial Interface schematic for an example of the required
logic.
Note that the RS485 interface cannot be used in point to point mode. It can only be used in a multi-
drop configuration where the chip SrlEnable line is used to control transmit/receive operation of the
serial transceiver.
Chips in a multi-drop environment should not be operated at different baud rates. This will result in
communication problems.
相關PDF資料
PDF描述
MC34063AN DC-DC Converter Control Circuits
MC3448AL IEEE-488 QUAD BIDIRECTIONAL TRANSCEIVER
MC3510 ECONOLINE: RSZ/P - 1kVDC
MC3750 MC3750
MC380A2 MC380A2
相關代理商/技術參數
參數描述
MC3110L 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC3111F 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC3111L 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC3112F 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC3112L 制造商:Rochester Electronics LLC 功能描述:- Bulk