參數資料
型號: PD6710
廠商: Intel Corp.
英文描述: ISA-to-PC-Card (PCMCIA) Controllers
中文描述: ISA -到- PC卡(PCMCIA)的控制器
文件頁數: 19/138頁
文件大小: 723K
代理商: PD6710
ISA-to-PC-Card (PCMCIA) Controllers
PD6710/
22
Datasheet
19
SPKR_OUT*/
C_SEL
Speaker Out / Chip Select
: This I/O pin can
be used as a digital output to a speaker to
allow a system to support a PC Card
s -
SPKR pin for fax/modem/voice and audio.
During reset this pin also serves as a chip-
configuration input.
If the level on this pin is low when
PWRGOOD rises, the PD6710 is configured
to support cards as a PC Card Socket 2
device, and the PD6722 is configured to
support cards as PC Card Socket 2 and
Socket 3 devices.
If the level on this pin is high when
PWRGOOD rises, the PD6710 is configured
to support cards as a PC Card Socket 0
device, and the PD6722 is configured to
support cards as PC Card Socket 0 and
Socket 1 devices.
This pin is internally pulled up during reset
so that default configuration of the chip as a
Socket 0 (and Socket 1 for PD6722) is
facilitated. Adhere to the minimum pulse-
width timing specification for PWRGOOD to
allow the internal pull-up to operate and
ensure the default configuration. Refer to
Bit 6
Socket Index
on page 41
for more
information on chip configuration.
After reset operations have completed, this
pin defaults to high-impedance, and can
then be enabled as a totem-pole speaker
output by the setting of a card socket
s
Speaker Enable bit (
Misc Control 1
register, bit 4). This output then becomes
the negative polarity XOR of each socket
s
BVD2/-SPKR/-LED input that has its
Speaker Enable bit set. For a description of
socket index values, refer to
Table 11
.
142
202
1
I/O-
PU
4
12 mA
CLK
Clock:
This input is connected to the ISA
bus OSC signal. A 14.318-MHz signal is
used to derive the internal 25-MHz clock
used for all socket timing. Alternately, a 25-
MHz clock source can be directly connected
and the internal synthesizer bypassed.
102
163
1
I
4
-VPP_VALID
In default mode this is a status input that can
be used by software as an indication that the
V
PP
power supply is stable.
When the PD6722 is in DMA mode (see
Misc Control 2, bit 6), this input is connected
to the TC (Terminal Count) signal of the ISA
bus. In DMA mode, this signal is active-high.
4
3
1
I
1
ISA_VCC
System Bus V
:
This supply pin can be
set to 3.3 or 5.0 V. The ISA Bus Interface pin
group (this table) operates at the voltage
applied to this pin independent of the
voltage applied to other pin groups.
76, 135
138, 195
2
PWR
Table 1. ISA Bus Interface Pins
(Sheet 4 of 4)
Pin Name
Description
Pin Number
Qty.
I/O
Pwr.
Drive
PD6710
PD6722
相關PDF資料
PDF描述
PD7-20-70A Analog IC
PD7-80-70A Analog IC
PD7-40-70A Analog IC
PD700A7 Optoelectronic
PDA2446-B-AP Analog Pigtailed PIN Photodiodes
相關代理商/技術參數
參數描述
PD67108AM 制造商:MICROSEMI 制造商全稱:Microsemi Corporation 功能描述:24-Channel PoE AF and AT DIMM
PD67108MAC-0212 制造商:Microsemi Corporation 功能描述:POE PSE MODULES - Bulk
PD67108MAC-GGGG 制造商:MICROSEMI 制造商全稱:Microsemi Corporation 功能描述:24-Channel PoE AF and AT DIMM
PD67108MDC-0212 制造商:Microsemi Corporation 功能描述:POE PSE MODULES - Bulk
PD67108MDC-GGGG 制造商:MICROSEMI 制造商全稱:Microsemi Corporation 功能描述:24-Channel PoE AF and AT DIMM