參數資料
型號: SAA2501H
廠商: NXP SEMICONDUCTORS
元件分類: 消費家電
英文描述: Digital Audio Broadcast DAB decoder
中文描述: SPECIALTY CONSUMER CIRCUIT, PQFP44
封裝: 10 X 10 MM, 1.75 MM HEIGHT, PLASTIC, SOT-307-2, QFP-44
文件頁數: 25/52頁
文件大?。?/td> 206K
代理商: SAA2501H
January 1995
25
Philips Semiconductors
Preliminary specification
Digital Audio Broadcast (DAB) decoder
SAA2501
7.20.5
SAA2501
STATUS
The host can check the status of the SAA2501 by reading the one-byte status word. After writing the SAA2501 ‘read
status’ operational address, the status byte may be read an arbitrary number of times. If status is read more than once,
it is updated by the SAA2501 between the individual readings. The status flags of the SAA2501 have the definition as
shown in Table 17.
Table 17
Status flag definitions
Notes
1.
By interpreting DST2 to DST0, the host can synchronize to the input frame frequency, and also determine at which
moment which L3 data item is available to be read. The value of DST2 to DST0 is only valid if flag INSYNC is set.
a) DST2 is a modulo 2 frame counter, i.e. DST2 inverts at the moment the decoding of a new frame is started. DST2
enables to host to sample the decoding subprocess DST1 to DST0 less frequently, meanwhile enabling the host
to see if it missed a state.
b) DST1 and DST0 values are explained in Table 18.
INSYNC is synchronization indication:
a) INSYNC = 0; the SAA2501 is not synchronized to the input data.
b) INSYNC = 1; the SAA2501 is synchronized to the input data.
As indicated in Section 7.20.8, some of the readable data item bits only have significance if INSYNC = 1.
L3RDY is L3 interface ready indication:
a) L3RDY = 0; the L3 interface cannot perform a new item data transfer yet.
b) L3RDY = 1; the L3 interface is ready for the next item data transfer.
After a device reset, L3RDY is cleared and will only become set after writing the first L3 control byte to the SAA2501.
The value of L3RDY can be tested by polling signal L3DATA instead of transferring the whole status byte.
2.
3.
4.
Table 18
Status bytes DST1 and DST0
The DST1 and DST0 values in general do not have a determined duration. However, subprocess 3 takes at least
1
2
a frame period when ISO/MPEG layer I data is decoded, and
5
6
of a frame period when ISO/MPEG layer II data is
decoded. Table 19 indicates the validity of the SAA2501 readable data items with respect to the decoding subprocess.
Reading of a data item in a period when it is not valid renders undefined data.
7
6
5
4
3
2
1
0
DST2
(1)
DST1
(1)
DST0
(1)
undefined
undefined
undefined
INSYNC
(2)(3)
L3RDY
(4)
DST1
DST0
FUNCTION
0
0
1
1
0
1
0
1
subprocess 0; reading Ancillary Data or decoding header
subprocess 1; decoding bit allocation or scale factor select information
subprocess 2; decoding scale factors
subprocess 3; decoding samples
相關PDF資料
PDF描述
SAA2502 ISO/MPEG Audio Source Decoder
SAA2502H ISO/MPEG Audio Source Decoder
SAA2503 MPEG2 audio decoder(MPEG2 音頻譯碼器)
SAA2503HT MPEG2 audio decoder
SAA2505H-M1 Digital multi-channel audio IC DUET
相關代理商/技術參數
參數描述
SAA2501HB-S 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Digital Audio Decoder & Support
SAA2502 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:ISO/MPEG Audio Source Decoder
SAA2502H 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:ISO/MPEG Audio Source Decoder
SAA2503 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:MPEG2 audio decoder
SAA2503HT 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:MPEG2 audio decoder