34
Agere Systems Inc.
Advance Data Sheet, Rev. 2
July 2001
SONET/SDH x84/x63 Ultramapper
TMXF84622 155 Mbits/s/622 Mbits/s Interface
3 Pin Information
(continued)
Table 1. Pin Descriptions
(continued)
* O
1
indicates external pull-up recommended (unused or system required),
I/O
2
indicates external pull-down recommended (unused or system required),
I
D
; I/O
D
indicate internal pull-down,
I
U
indicates internal pull-up.
Receive path convention is away from the high-speed fiber output. Note that LINETX signals are labeled
“
Transmit,
”
as seen from the cross
connect perspective.
Pin
Symbol
Type
I/O
*
Description
Multi-Function System Interface
(continued)
LINE Receive Path Direction (60)
LINETXDATA[30:1]
—
O
A23, B23,
C23, B24,
C24, A26,
F23, A27,
C26, F24,
C27, A29,
F26, A30,
E27, C29,
C30, B31,
E29, E30,
C34, H29,
E33, D34,
F33,G33,
J30, K29,
H33, G34
E21, F21,
A24, F22,
A25, E23,
B25, E24,
B26, A28,
B27, F25,
E26, B28,
B29, A31,
B30, F27,
A32, F29,
F30, D33,
E32, F32,
H30, E34,
J29, F34,
H32, L29
Configurable Outputs from the Internal Cross Connect
and Can Be Individually 3-stated
.
Transport modes:
Framer
—
LIU: Transmit positive-rail or single-rail DS1/E1 line
data output (to an external LIU).
M12 or E12 or VT Mapper: Transmit DS1/E1/VC/DS2/E2 data
output.
M23 or E23: Transmit DS2/E2 data output. Up to 21 DS2/12
E2 signals may be assigned to any of the 30 LINETXDATA
outputs.
LINETXCLK[30:1]
—
I/O
Configurable Inputs/Outputs from the Internal Cross
Connect and Can Be Individually 3-Stated.
Transport mode:
Framer
—
LIU: Transmit DS1/E1 line clock output.
M12 or E12 or VT mapper: Transmit DS1/E1/VC line clock
output. If, in M12/E12 mode, DS1/E1 signals don
’
t go out of
the device, these pins may carry DS2 clock input/output for
M12/E12 deMUX.
M23 or E23: Transmit DS2/E2 clock input/output. Up to
21 DS2/12 E2 signals may be assigned to any of the 30
LINETXCLK outputs.