參數資料
型號: XRT75R03IV
廠商: EXAR CORP
元件分類: 數字傳輸電路
英文描述: THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
中文描述: DATACOM, PCM TRANSCEIVER, PQFP128
封裝: 14 X 20 MM, LQFP-128
文件頁數: 10/92頁
文件大小: 492K
代理商: XRT75R03IV
XRT75R03
REV. 1.0.7
xr
THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
7
40
127
22
DMO_0
DMO_1
DMO_2
O
Drive Monitor Output - Channel 0:
Drive Monitor Output - Channel 1:
Drive Monitor Output - Channel 2:
These output signals are used to indicate some sort of fault condition within
the Transmit Output signal path.
This output pin will toggle "High" anytime the Transmit Drive Monitor cir-
cuitry either, via the corresponding MTIP and MRING input pins or inter-
nally, detects no bipolar pulses via the Transmit Output line signal (e.g., via
the TTIP_n and TRING_n output pins) for 128 bit-periods.
This output pin will be driven "Low" anytime the Transmit Drive Monitor cir-
cuitry has detected at least one bipolar pulse via the Transmit Output line
signal within the last 128 bit periods.
67
TxClkINV/
SClk
I
Hardware Mode: Transmit Clock Invert
Host Mode: Serial Clock Input:
Hardware mode
This input pin is used to select the edge of the TxCLK_n input that the
Transmit Section of all channels will use to sample the TPDATA_n and
TNDATA_n input pins.
Setting this input pin “High” configures all three Transmitters to sample the
TPData_n and TNData_n data on the rising edge of the TxClk_n .
Setting this input pin “Low” configures all three Transmitters to sample the
TPData_n and TNData_n data on the falling edge of the TxClk_n .
Host Mode
In the Host Mode this pin functions as SClk input pin please refer to the pin
descriptions for the Microprocessor interface.
SYSTEM-SIDE TRANSMIT INPUT AND TRANSMIT CONTROL PINS
P
IN
#
S
IGNAL
N
AME
T
YPE
D
ESCRIPTION
相關PDF資料
PDF描述
XRT75R06D SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
XRT75R06DIB SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
XRT75R06 SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
XRT75R06IB SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
XRT75R12D TWELVE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
相關代理商/技術參數
參數描述
XRT75R03IV-F 功能描述:外圍驅動器與原件 - PCI 3-Ch E3/DS3/STS-1 RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
XRT75R03IVTR 功能描述:時鐘合成器/抖動清除器 3CHNNEL E3/DS3/STS 1 JITTER ATTENUATOR RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75R03IVTR-F 功能描述:時鐘合成器/抖動清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75R06 制造商:EXAR 制造商全稱:EXAR 功能描述:SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
XRT75R06D 制造商:EXAR 制造商全稱:EXAR 功能描述:SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER