XRT94L43
286
REV. 1.0.2
SONET/SDH OC-12 TO 12XDS3/E3 MAPPER
AB23
GPIO_10
ExtLOS_10
I/O
TTL/
CMOS
General Purpose Input/Output Pin or External LOS Input Pin:
The function of this input pin depends on whether or not Channel 10 of
the DS3/E3 Framer Block is enabled.
GPIO_10 (DS3/E3 Framer Block - Channel 10 is disabled).
If the DS3/E3 Framer Block is disabled, then this pin will function as a
General Purpose Input/Output pin. This input pin can be configured to
function as either an input or output pin by writing the appropriate value
into Bit 2 (GPIO_DIR_10), within the Operation General Purpose Input/
Output Direction Register - 1 (Indirect Address = 0x00, 0x4A), (Direct
Address = 0x014A).
When configured as an input pin, the state of this pin can be monitored
by reading the state of Bit 2 (GPIO_10) within the Operation General
Purpose Input/Output Register - Byte 1 (Indirect Address = 0x00, 046),
(Direct Address = 0x0146).
When configured as an output pin, the state of this pin can be controlled
by writing the appropriate value into Bit 2 (GPIO_10) within the Opera-
tion General Purpose Input/Output Register - Byte 1 (Indirect Address =
0x00, 0x46), (Direct Address = 0x0146).
ExtLOS_10 (DS3/E3 Framer Block - Channel 10 is enabled).
If the DS3/E3 Framer Block is enabled, then this pin will function as the
External LOS Input pin for Channel 10. This input pin is intended to be
connected to an LOS output pin of a DS3/E3 LIU IC.
If this input pin is pulled "High", then the corresponding DS3/E3 Framer
block will automatically declare an LOS condition.
AD15
GPIO_11
ExtLOS_11
I/O
TTL/
CMOS
General Purpose Input/Output Pin or External LOS Input Pin:
The function of this input pin depends on whether or not Channel 11 of
the DS3/E3 Framer Block is enabled.
GPIO_11 (DS3/E3 Framer Block - Channel 11 is disabled).
If the DS3/E3 Framer Block is disabled, then this pin will function as a
General Purpose Input/Output pin. This input pin can be configured to
function as either an input or output pin by writing the appropriate value
into Bit 3 (GPIO_DIR_11), within the Operation General Purpose Input/
Output Direction Register - 1 (Indirect Address = 0x00, 0x4A), (Direct
Address = 0x014A).
When configured as an input pin, the state of this pin can be monitored
by reading the state of Bit 3 (GPIO_11) within the Operation General
Purpose Input/Output Register - Byte 1 (Indirect Address = 0x00, 046),
(Direct Address = 0x0146).
When configured as an output pin, the state of this pin can be controlled
by writing the appropriate value into Bit 3 (GPIO_11) within the Opera-
tion General Purpose Input/Output Register - Byte 1 (Indirect Address =
0x00, 0x46), (Direct Address = 0x0146).
ExtLOS_11 (DS3/E3 Framer Block - Channel 11 is enabled).
If the DS3/E3 Framer Block is enabled, then this pin will function as the
External LOS Input pin for Channel 11. This input pin is intended to be
connected to an LOS output pin of a DS3/E3 LIU IC.
If this input pin is pulled "High", then the corresponding DS3/E3 Framer
block will automatically declare an LOS condition.
GENERAL PURPOSE INPUT/OUTPUT
P
IN
#
S
IGNAL
N
AME
I/O
S
IGNAL
T
YPE
D
ESCRIPTION