參數資料
型號： AD8310ARMZ-REEL7
廠商： Analog Devices Inc
文件頁數： 14/24頁
文件大?。?/td> 0K
描述： IC AMP LOGARITHMIC 8MSOP
標準包裝： 1,000
類型： 對數放大器
應用： 接收器信號強度指示（RSSI）
安裝類型： 表面貼裝
封裝/外殼： 8-TSSOP，8-MSOP（0.118"，3.00mm 寬）
供應商設備封裝： 8-MSOP
包裝： 帶卷 (TR)
AD8310
Rev. F | Page 21 of 24
Table 6. Evaluation Board Setup Options
Component
Function
Default Condition
TP1, TP2
Supply and Ground Vector Pins.
Not applicable
SW1
Device Enable. When in Position A, the ENBL pin is connected to +VS, and the AD8310 is in normal
operating mode. When in Position B, the ENBL pin is connected to ground, putting the device into
sleep mode.
SW1 = A
R1/R4
SMA Connector Grounds. Connects common of INHI and INLO SMA connectors to ground. They
can be used to isolate the generator ground from the evaluation board ground. See Figure 28.
R1 = R4 = 0 Ω
C1, C2, R3
Input Interface. R3 (52.3 Ω) combines with the AD8310’s 1 kΩ input impedance to give an overall
broadband input impedance of 50 Ω. C1, C2, and the AD8310’s input impedance combine to set a
high-pass input corner of 32 kHz. Alternatively, R3, C1, and C2 can be replaced by an inductor and
matching capacitors to form an input matching network. See the Input Matching section for details.
R3 = 52.3 Ω,
C1 = C2 = 0.01 μF
C3
RSSI (Video) Bandwidth Adjust. The addition of C3 (farads) lowers the RSSI bandwidth of the
AD8310’s output according to the following equation:
CFILT = 1/(2π × 3 kΩ Video Bandwidth) 2.1 pF
C3 = open
C4, C5, R5
Supply Decoupling. The normal supply decoupling of 0.01 μF (C4) can be augmented by a larger
capacitor in C5. An inductor or small resistor can be placed in R5 for additional decoupling.
C4 = 0.01 μF,
C5 = open, R5 = 0 Ω
R6
Output Source Impedance. In cable-driving applications, a resistor (typically 50 Ω or 75 Ω) can be
placed in R6 to give the circuit a back-terminated output impedance.
R6 = 0 Ω
W1, W2, C6, R7
Output Loading. Resistors and capacitors can be placed in C6 and R7 to load-test VOUT. Jumper W1
and Jumper W2 are used to connect or disconnect the loads.
C6 = R7 = open,
W1 = W2 = installed
C7
Offset Compensation Loop. A capacitor in C7 reduces the corner frequency of the offset control
loop in low frequency applications.
C7 = open
相關PDF資料
PDF描述
VE-24P-IV-F1 CONVERTER MOD DC/DC 13.8V 150W
AD8138ARM-REEL IC AMP DIFF LDIST LP 95MA 8MSOP
AD8138AR-REEL IC AMP DIFF LDIST LP 95MA 8SOIC
VE-24N-IV-F4 CONVERTER MOD DC/DC 18.5V 150W
VE-B4H-MV-B1 CONVERTER MOD DC/DC 52V 150W
相關代理商/技術參數
參數描述
AD8310ARMZ-REEL71 制造商:AD 制造商全稱:Analog Devices 功能描述:Fast, Voltage-Out DC-440 MHz, 95 dB Logarithmic Amplifier
AD8310-EVAL 制造商:Analog Devices 功能描述:AD8310 EVALUATION BOARD - Bulk
AD8310-EVALZ 功能描述:BOARD EVAL FOR AD8310 RoHS:是 類別:編程器，開發系統 >> 評估板 - 運算放大器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:-
AD8311 制造商:AD 制造商全稱:Analog Devices 功能描述:50 dB GSM PA Controller
AD8311ACBZ-P2 制造商:Analog Devices 功能描述:GSM PA CNTRLR 6PIN WLCSP - Tape and Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*