- 您現在的位置：買賣IC網 > PDF目錄1914 > DS21FF44 (Maxim Integrated Products)IC FRAMER E1 4X4 16CH 300-BGA PDF資料下載
參數資料
| 型號： | DS21FF44 |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 80/117頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC FRAMER E1 4X4 16CH 300-BGA |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 40 |
| 控制器類型： | E1 調幀器 |
| 接口： | 并行/串行 |
| 電源電壓： | 2.97 V ~ 3.63 V |
| 電流 - 電源： | 300mA |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 300-BBGA |
| 供應商設備封裝： | 300-PBGA（27x27） |
| 包裝： | 管件 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁當前第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁
DS21FT44/DS21FF44
65 of 117
17.1. Receive Side
If the receive side elastic store is enabled (RCR2.1=1), then the user must provide either a 1.544MHz
(RCR2.2 =0) or 2.048MHz (RCR2.2=1) clock at the RSYSCLK pin. The user has the option of either
providing a frame/multiframe sync at the RSYNC pin (RCR1.5=1) or having the RSYNC pin provide a
pulse on frame/multiframe boundaries (RCR1.5=0). If the user wishes to obtain pulses at the frame
boundary, then RCR1.6 must be set to zero and if the user wishes to have pulses occur at the multiframe
boundary, then RCR1.6 must be set to one. The DS21Q44 will always indicate frame boundaries by the
RFSYNC output whether the elastic store is enabled or not. If the elastic store is enabled, then either CAS
(RCR1.7=0) or CRC4 (RCR1.7=1) multiframe boundaries will be indicated by the RMSYNC output. If
the user selects to apply a 1.544MHz clock to the RSYSCLK pin, then every fourth channel of the
received E1 data is deleted and an F-bit position (which will be forced to one) is inserted. Hence,
Channels 1, 5, 9, 13, 17, 21, 25, and 29 (timeslots 0, 4, 8, 12, 16, 20, 24, and 28) will be deleted from the
received E1 data stream. Also, in 1.544MHz applications, the RCHBLK output will not be active in
Channels 25 through 32 (or in other words, RCBR4 is not active). See Section 22 for timing details. If the
512-bit elastic buffer either fills or empties, a controlled slip will occur. If the buffer empties, then a full
frame of data (256 bits) will be repeated at RSER and the SR1.4 and RIR.3 bits will be set to a one. If the
buffer fills, then a full frame of data will be deleted and the SR1.4 and RIR.4 bits will be set to a one.
17.2. Transmit Side
The operation of the transmit elastic store is very similar to the receive side. The transmit side elastic
store is enabled by CCR3.7. A 1.544MHz (CCR3.1=0) or 2.048MHz (CCR3.1=1) clock can be applied to
the TSYSCLK input. The TSYSCLK can be a bursty clock with rates up to 8.192MHz. If the user selects
to apply a 1.544MHz clock to the TSYSCLK pin, then the data sampled at TSER will be ignored every
fourth channel. Hence, Channels 1, 5, 9, 13, 17, 21, 25, and 29 (timeslots 0, 4, 8, 12, 16, 20, 24, and 28)
are ignored. The user must supply an 8kHz frame sync pulse to the TSSYNC input. See Section 22 for
timing details. Controlled slips in the transmit elastic store are reported in the SR2.0 bit and the direction
of the slip is reported in the RIR.6 and RIR.7 bits.
18.
ADDITIONAL (Sa) AND INTERNATIONAL (Si) BIT OPERATION
Each framer in the DS21Q44 provides for access to both the Sa and the Si bits by three different methods.
The first is by a hardware scheme using the RLINK/RLCLK and TLINK/ TLCLK pins. The first method
is discussed in Section 18.1. The second involves using the internal RAF/RNAF and TAF/TNAF registers
and is discussed in Section 18.2 The third method which is covered in Section 18.3 involves an expanded
version of the second method and is one of the features added to the DS21Q44 from the original
DS21Q43 definition.
18.1. Hardware Scheme
On the receive side, all of the received data is reported at the RLINK pin. Through RCR2, the user can
control the RLCLK pin to pulse during any combination of Sa bits. This allows the user to create a clock
that can be used to capture the needed Sa bits. If RSYNC is programmed to output a frame boundary, it
will identify the Si bits. See Section 22 for detailed timing.
On the transmit side, the individual Sa bits can be either sourced from the internal TNAF register (see
Section 18.2 for details) or from the external TLINK pin. Through TCR2, the framer can be programmed
to source any combination of the additional bits from the TLINK pin. If the user wishes to pass the Sa bits
through the framer without them being altered, then the device should be set up to source all five Sa bits
by the TLINK pin and the TLINK pin should be connected to the TSER pin. Si bits can be inserted
through the TSER pin by the clearing of the TCR1.3 bit. See the timing diagrams and the transmit data
flow diagram in Section 22 for examples.
相關PDF資料 |
PDF描述 |
|---|---|
| DS21FT44N+ | IC FRAMER 4X4 16CH 300-BGA |
| DS21Q352B | IC TXRX QUAD T1/E1 3.3V 256-BGA |
| DS21Q41BT | IC FRAMER T1 QUAD 128-TQFP |
| DS21Q42T+ | IC FRAMER ENHANCED T1 4X 128TQFP |
| DS21Q43-ATN | IC FRAMER E1 QUAD 5V 128-TQFP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS21FF44N | 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray |
| DS21FT40 | 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:Four x Three 12 Channel E1 Framer |
| DS21FT40N | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| DS21FT42 | 功能描述:網絡控制器與處理器 IC 4x4 16/4x3 12 Chnl T1/T1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray |
| DS21FT42N | 功能描述:網絡控制器與處理器 IC 4x4 16/4x3 12 Chnl T1/T1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray |
發布緊急采購，3分鐘左右您將得到回復。