參數資料
型號： DS3141+
廠商： Maxim Integrated Products
文件頁數： 30/88頁
文件大?。?/td> 0K
描述： IC FRAMER DS3/E3 SNGL 144CSBGA
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 160
控制器類型： DS3/E3 調幀器
接口： LIU
電源電壓： 3.135 V ~ 3.465 V
電流 - 電源： 80mA
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 144-BGA，CSPBGA
供應商設備封裝： 144-TECSBGA（13x13）
包裝： 托盤
DS3141/DS3142/DS3143/DS3144 Single/Dual/Triple/Quad DS3/E3 Framers
36 of 88
Bit 7: Manual Error-Insert Mode Select (MEIMS). When this bit is logic 0, the framer inserts errors on each 0-to-1
transition of the BPVI, EXZI, T3PBEI, T3CPBEI, or FBEI control bits. When this bit is logic 1, the framer inserts
errors on each 0-to-1 transition of the TMEI input signal. The appropriate BPVI, EXZI, T3PBEI, T3CPBEI, or FBEI
control bit must be set to 1 for this to occur. If all of the BPVI, EXZI, T3PBEI, T3CPBEI, and FBEI control bits are
set to 0, no errors are inserted.
0 = use 0-to-1 transition on the BPVI, EXZI, T3PBEI, T3CPBEI, or FBEI control bits to insert errors
1 = use 0-to-1 transition on the TMEI input signal to insert errors
Register Name:
T3E3SR
Register Description:
DS3/E3 Status Register
Register Address:
18h
Bit #
7
6
5
4
3
2
1
0
Name
N/A
SEF
T3IDLE
RAI
AIS
OOF
LOS
Default
—
Bit 0: Loss-of-Signal Occurrence (LOS). This real-time status bit is set when the framer detects loss-of-signal
and cleared when the LOS condition terminates. The LOS alarm criteria are described in Table 7-Eand Table 7-F.
Note: The LOS status bit is only valid when the framer is in dual-rail (POS/NEG) interface mode. When the framer is in binary (NRZ) interface
mode, LOS status must be sourced from the neighboring LIU. The reason for this is that in binary mode the neighboring LIU performs
B3ZS/HDB3 decoding—substituting zeros for B3ZS/HDB3 codewords—before passing the received traffic to the framer. Because this decoded
traffic can legitimately have long strings of zeros in it, the framer cannot look for and declare LOS in binary mode. In general, the IC that does
the B3ZS/HDB3 decoding must provide the LOS status information.
Bit 1: Out-of-Frame Occurrence (OOF). This real-time status bit is set when the framer detects an OOF condition
and cleared when the OOF condition terminates. The OOF defect criteria are described in Table 7-Eand Table 7-F.
Bit 2: Alarm Indication Signal Detected (AIS). This real-time status bit is set when the framer detects an
incoming AIS and cleared when the AIS condition terminates. The AIS alarm criteria are described in Table 7-Eand
Bit 3: Remote Alarm Indication Detected (RAI). This real-time status bit is set when the framer detects an
incoming RAI signal on the X bits or Sa bits and cleared when the RAI condition terminates. The RAI alarm criteria
are described in Table 7-Eand Table 7-F. RAI can also be indicated through FEAC codes when the framer is
operated in DS3 C-Bit Parity mode, but this bit does not indicate the FEAC alarm code detection.
Bit 4: DS3 Idle-Signal Detected (T3IDLE). This real-time status bit is set when the framer detects an incoming
DS3 idle signal and cleared when the idle signal terminates. The DS3 idle signal alarm criteria are described in
Table 7-Eand Table 7-F. When the framer is operated in the E3 mode, this status bit should be ignored.
Bit 5: Severely Errored-Frame Detected (SEF). This real-time status bit is set when the frame detects a severely
errored frame condition and cleared when the SEF condition clears. The SEF defect criteria are described in
相關PDF資料
PDF描述
DS31412N IC 12CH DS3/3 FRAMER 349-BGA
DS3150TN IC LIU T3/E3/STS-1 IND 48-TQFP
DS3154N+ IC LIU DS3/E3/STS-1 QD 144CSBGA
DS3164+ IC ATM/PACKET PHY QUAD 400-BGA
DS3170+ IC TXRX DS3/E3 100-CSBGA
相關代理商/技術參數
參數描述
DS3141+ 功能描述:網絡控制器與處理器 IC Single DS3/E3 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS314-1010NR WAF 制造商:ON Semiconductor 功能描述:
DS31412 功能描述:網絡控制器與處理器 IC 12 Port DS3/E3 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS31412N 功能描述:網絡控制器與處理器 IC 12 Port DS3/E3 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS31415 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:3-Input, 4-Output, Single DPLL Timing IC with Sub-ps Output Jitter and 1588 Clock
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*