參數資料
型號: DSPB56366AG120
廠商: Freescale Semiconductor
文件頁數: 28/110頁
文件大?。?/td> 0K
描述: IC DSP 24BIT AUD 120MHZ 144-LQFP
產品變化通告: Product Discontinuation 24/Feb/2012
標準包裝: 60
系列: DSP56K/Symphony
類型: 音頻處理器
接口: 主機接口,I²C,SAI,SPI
時鐘速率: 120MHz
非易失內存: ROM(240 kB)
芯片上RAM: 69kB
電壓 - 輸入/輸出: 3.30V
電壓 - 核心: 3.30V
工作溫度: -40°C ~ 110°C
安裝類型: 表面貼裝
封裝/外殼: 144-LQFP
供應商設備封裝: 144-LQFP(20x20)
包裝: 托盤
DSP56366 Technical Data, Rev. 3.1
2-20
Freescale Semiconductor
2.11
SPDIF Transmitter Digital Audio Interface
2.12
Timer
Table 2-13 Digital Audio Interface (DAX) Signals
Signal
Name
Type
State During
Reset
Signal Description
ACI
Input
GPIO
Disconnected
Audio Clock Input—This is the DAX clock input. When programmed to use
an external clock, this input supplies the DAX clock. The external clock
frequency must be 256, 384, or 512 times the audio sampling frequency
(256
× Fs, 384 × Fs or 512 × Fs, respectively).
PD0
Input, output, or
disconnected
GPIO
Disconnected
Port D 0—When the DAX is configured as GPIO, this signal is individually
programmable as input, output, or internally disconnected.
The default state after reset is GPIO disconnected.
This input is 5 V tolerant.
ADO
Output
GPIO
Disconnected
Digital Audio Data Output—This signal is an audio and non-audio output
in the form of AES/EBU, CP340 and IEC958 data in a biphase mark format.
PD1
Input, output, or
disconnected
GPIO
Disconnected
Port D 1—When the DAX is configured as GPIO, this signal is individually
programmable as input, output, or internally disconnected.
The default state after reset is GPIO disconnected.
This input is 5 V tolerant.
Table 2-14 Timer Signal
Signal
Name
Type
State during
Reset
Signal Description
TIO0
Input or Output
Input
Timer 0 Schmitt-Trigger Input/Output—When timer 0 functions as an
external event counter or in measurement mode, TIO0 is used as input.
When timer 0 functions in watchdog, timer, or pulse modulation mode, TIO0
is used as output.
The default mode after reset is GPIO input. This can be changed to output or
configured as a timer input/output through the timer 0 control/status register
(TCSR0). If TIO0 is not being used, it is recommended to either define it as
GPIO output immediately at the beginning of operation or leave it defined as
GPIO input but connected to Vcc through a pull-up resistor in order to ensure
a stable logic level at this input.
This input is 5 V tolerant.
相關PDF資料
PDF描述
DSPB56367AG150 IC DSP 24BIT 150MHZ 144-LQFP
DSPB56371AF180 IC DSP 24BIT 180MHZ 80-LQFP
DSPB56374AEC IC DSP 24BIT 150MHZ 52-LQFP
DSPB56720CAG DSP 24BIT AUD 200MHZ 144-LQFP
DSPB56724AG DSP 24BIT AUD 250MHZ 144-LQFP
相關代理商/技術參數
參數描述
DSPB56366PV120 制造商:Motorola Inc 功能描述: 制造商:Freescale Semiconductor 功能描述:IC 制造商:MOTOROLA 功能描述:
DSPB56367AG150 功能描述:數字信號處理器和控制器 - DSP, DSC 150Mhz/150MIPS RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT
DSPB56367PV150 功能描述:數字信號處理器和控制器 - DSP, DSC 150Mhz/ 150MIPS RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT
DSPB5636AG120 制造商:Freescale Semiconductor 功能描述:
DSPB56371AF150 功能描述:數字信號處理器和控制器 - DSP, DSC 150 MHZ VERSION DSPB371 RoHS:否 制造商:Microchip Technology 核心:dsPIC 數據總線寬度:16 bit 程序存儲器大小:16 KB 數據 RAM 大小:2 KB 最大時鐘頻率:40 MHz 可編程輸入/輸出端數量:35 定時器數量:3 設備每秒兆指令數:50 MIPs 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-44 安裝風格:SMD/SMT