參數資料
型號： MAX1358BETL+T
廠商： Maxim Integrated Products
文件頁數： 22/71頁
文件大小： 0K
描述： IC DAS 16BIT 40-TQFN
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 2,500
類型： 數據采集系統（DAS）
分辨率（位）： 16 b
采樣率（每秒）： 21.94k
數據接口： MICROWIRE?，QSPI?，串行，SPI?
電壓電源： 模擬和數字
電源電壓： 1.8 V ~ 3.6 V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 40-WFQFN 裸露焊盤
供應商設備封裝： 40-TQFN-EP（6x6）
包裝： 帶卷 (TR)
MAX1358B
16-Bit, Data-Acquisition System with ADC, DACs,
UPIOs, RTC, Voltage Monitors, and Temp Sensor
______________________________________________________________________________________
29
Voltage Supervisors
The MAX1358B provides voltage supervisors to monitor
DVDD and CPOUT. The first supervisor monitors the
DVDD supply voltage. RESET asserts and sets the corre-
sponding LDVD status bit when DVDD falls below the
1.8V threshold voltage. When the DVDD supply voltage
rises above the threshold during power-up,
RESET
deasserts after a nominal 1.5s timeout period to give the
crystal oscillator time to stabilize. Set the threshold hys-
teresis using the HYSE bit of the PS_VMONS register.
See the
PS_VMONS Register section for configuring hys-
teresis. There is no separate voltage monitor for AVDD,
but the analog supply is covered by the DVDD monitor in
many applications where DVDD and AVDD are externally
connected together. Multiple supply applications where
AVDD and DVDD are not connected together require a
separate external voltage monitor for AVDD. See Figure 7
for a block diagram of the DVDD voltage supervisor.
The second voltage monitor tracks the charge-pump
output voltage, CPOUT. If CPOUT falls below the 2.7V
threshold, a corresponding register status bit (LCPD) is
set to flag the condition. The CPOUT monitor output
can also be mapped to the interrupt generator and out-
put on INT. The CPOUT monitor can be used as a 3V
AVDD monitor in applications where the charge pump is
disabled and CPOUT is connected to AVDD. AVDD
must be greater or equal to DVDD when CPOUT is used
to monitor AVDD. See Figure 8 for a block diagram of the
CPOUT voltage supervisor.
Interrupt Generator (INT)
The interrupt generator provides an interrupt to an
external C. The source of the interrupt is generated by
the status register and can be masked and unmasked
through the IMSK register. CRDY is unmasked by
default, and INT is active-high at power-on reset. INT is
programmable as active-high and active-low. Possible
sources include a rising or falling edge of UPIO_, an
RTC alarm, an ADC conversion completion, or the volt-
age-supervisor outputs. The interrupt causes INT to
assert when configured as an interrupt output.
OP
1.22V
1.65V
LINEAR 1.65V VOLTAGE REGULATOR
DVDD
REG
LDOE
Figure 5. Linear-Regulator Block Diagram
CF+
CF-
CPOUT
REG
M32K
CHARGE-PUMP DOUBLER
NONOVERLAP
CLOCK GENERATOR
CPE
Figure 6. Charge-Pump Block Diagram
相關PDF資料
PDF描述
MAX1021BETX+T IC ADC/DAC 10BIT W/FIFO 36-TQFN
GTC030-20-29P CONN RCPT 17POS PANEL MNT W/PINS
MAX1020BETX+T IC ADC/DAC 10BIT 36-TQFN-EP
MS3108E22-20S CONN PLUG 9POS RT ANG W/SCKT
MS27484T20F41PC CONN PLUG 41POS STRAIGHT W/PINS
相關代理商/技術參數
參數描述
MAX1358EVKIT+ 制造商:Maxim Integrated Products 功能描述:EVALUATION KIT FOR THE MAX1358 - Boxed Product (Development Kits)
MAX1359ACGL 制造商:Maxim Integrated Products 功能描述:- Rail/Tube
MAX1359ACTL 制造商:Maxim Integrated Products 功能描述:16-BIT DATA-ACQUISITION SYSTEM W ADC,DACS,UPI - Rail/Tube
MAX1359ACTL+ 制造商:Maxim Integrated Products 功能描述:DATA ACQ SYS SGL ADC SGL DAC 16BIT 40TQFN EP - Rail/Tube
MAX1359ACTL+T 制造商:Maxim Integrated Products 功能描述:DATA ACQ SYS SGL ADC SGL DAC 16BIT 40TQFN EP - Tape and Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*