參數資料
型號： MC13180
廠商： MOTOROLA INC
元件分類： 通信及網絡
英文描述： 2.4 GHz Low Power Wireless Transceiver IC for Bluetooth⑩ Applications
中文描述： SPECIALTY TELECOM CIRCUIT, PQCC48
封裝： PLASTIC, QFN-48
文件頁數： 24/58頁
文件大?。?/td> 992K
代理商： MC13180
24
MC13180 Product Preview
MOTOROLA
Functional Description
4 Functional Description
Note: In the following description, control bits contained in the MC13180 register map for various
functions will be identified by register number and bit number(s). For example, bit R4/8 references bit 8 of
register 4 while R5/9
-
3 identifies bits 9 through 3, inclusive, of register 5 (decimal notation). Unless
otherwise noted, a default register map configuration as listed in Figure 4 is assumed.
4.1 Overview
The MC13180 is a complete RF transceiver for Bluetooth applications. The device, when coupled with an
MC71000 controller or any controller containing an integrated Joint Detection/Minimum Length Sequence
Estimator (JD/MLSE) digital decoder, exhibits superior RF performance with small size and low cost.
Only minimal external components are required to complete the RF link of a Bluetooth system.
4.2 MC13180 States
Figure 11 illustrates the various states which the MC13180 can assume. A description of each state
follows.
4.3 OFF State
In the OFF state, no power is being applied to the V
CC
RF or V
DDINT
of the device. During this state, all
digital inputs should be held at ground to avoid forward biasing internal ESD diodes.
4.4 POWER UP State
During this state, power is applied to the device in an orderly fashion. All digital inputs should continue to
be held at ground.
Since V
DDINT
of the device must always be less than or equal to the V
CC
RF supplied to the device, it is
generally desired to first allow the V
CC
RF to rise and stabilize, then follow with applying the V
DDINT
supply. This prevents internal protection diodes from forward biasing.
SPI operations are not allowed during this state.
4.5 RESET State
The RESET state can be entered at any time from any state with the exception of the OFF and POWER UP
states. During the RESET state, SPI operations are forbidden.
The RESET state places the entire contents of the internal register map into a known condition. All digital
outputs are active and driven to a logic low. The SDATA I/O pin is configured as an input, and the
RFDATA I/O pin is configured as an output. The crystal oscillator is inactive and therefore the CLK
output remains at a static low level.
4.6 CONFIG State
Once the RES pin is de
-
asserted, the crystal oscillator and data clock PLL of the device become active. The
CLK output will attempt to synthesize a clock frequency based upon the crystal oscillator frequency and
values loaded into the data clock N and R registers. These values assume an initial reference frequency of
13 MHz and the data clock values are initialized from reset to synthesize 24 MHz from this reference.
相關PDF資料
PDF描述
MC13280AY 80/100 MHz Video Processor
MC13281A 80/100 MHz Video Processor
MC13281B 80/100 MHz Video Processor
MC13283 130 MHz VIDEO PROCESSOR WITH OSD INTERFACE
MC13283P 130 MHz VIDEO PROCESSOR WITH OSD INTERFACE
相關代理商/技術參數
參數描述
MC13181 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:Wireless Power Management Integrated Circuit
MC13181R2 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:Wireless Power Management Integrated Circuit
MC13190 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:2.4 GHz Short-Range, Low-Power Transceiver
MC13190D 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:2.4 GHz Short-Range, Low-Power Transceiver
MC13190FC 制造商:Freescale Semiconductor 功能描述:RF TRANSCEIVER AM 2.75V 32-PIN QFN EP TRAY - Tape and Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*