Appendix A Electrical Characteristics
MC9S12XE-Family Reference Manual , Rev. 1.21
1202
Freescale Semiconductor
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
maximum-rated voltages to this high-impedance circuit. Reliability of operation is enhanced if unused
inputs are tied to an appropriate logic voltage level (e.g., either VSS35 or VDD35).
A.1.6
ESD Protection and Latch-up Immunity
All ESD testing is in conformity with CDF-AEC-Q100 stress test qualication for automotive grade
integrated circuits. During the device qualication ESD stresses were performed for the Human Body
Model (HBM) and the Charge Device Model.
A device will be dened as a failure if after exposure to ESD pulses the device no longer meets the device
specication. Complete DC parametric and functional testing is performed per the applicable device
Table A-1. Absolute Maximum Ratings1
1 Beyond absolute maximum ratings device might be damaged.
Num
Rating
Symbol
Min
Max
Unit
1
I/O, regulator and analog supply voltage
VDD35
–0.3
6.0
V
2
Digital logic supply voltage2
2 The device contains an internal voltage regulator to generate the logic and PLL supply out of the I/O supply. The absolute
maximum ratings apply when the device is powered from an external source.
VDD
–0.3
2.16
V
3
PLL supply voltage2
VDDPLL
–0.3
2.16
V
4
NVM supply voltage2
VDDF
–0.3
3.6
V
5
Voltage difference VDDX to VDDA
VDDX
–6.0
0.3
V
6
Voltage difference VSSX to VSSA
VSSX
–0.3
0.3
V
7
Digital I/O input voltage
VIN
–0.3
6.0
V
8
Analog reference
VRH, VRL
–0.3
6.0
V
9
EXTAL, XTAL
VILV
–0.3
2.16
V
10
TEST input
VTEST
–0.3
10.0
V
11
Instantaneous maximum current
Single pin limit for all digital I/O pins3
3 All digital I/O pins are internally clamped to VSSX and VDDX, or VSSA and VDDA.
I
D
–25
+25
mA
12
Instantaneous maximum current
Single pin limit for EXTAL, XTAL4
4 Those pins are internally clamped to VSSPLL and VDDPLL.
I
DL
–25
+25
mA
13
Instantaneous maximum current
Single pin limit for TEST 5
5 This pin is clamped low to VSSPLL, but not clamped high. This pin must be tied low in applications.
I
DT
–0.25
0
mA
14
Maximum current
Single pin limit for power supply pins
I
DV
–100
+100
mA
15
Storage temperature range
Tstg
–65
155
°C