Pericom Semiconductor 8. EEPROM INTERFACE The EEPROM interface" />
參數資料
型號: PI7C9X7952AFDE
廠商: Pericom
文件頁數: 58/68頁
文件大?。?/td> 0K
描述: IC PCIE-TO-UART BRIDGE 128LQFP
標準包裝: 90
應用: PCIe至UART橋接
接口: 高級配置電源接口(ACPI)
電源電壓: 1.8V, 3.3V
封裝/外殼: 128-LQFP 裸露焊盤
供應商設備封裝: 128-LQFP(14x14)
包裝: 托盤
安裝類型: 表面貼裝
PI7C9X7952
PCI Express Dual UART
Datasheet
Page 61 of 68
May 2013 – Revision 1.4
Pericom Semiconductor
8. EEPROM INTERFACE
The EEPROM interface consists of five pins: SR_DI (EEPROM data input), SR_DO (EEPROM data
output), SR_CS (EEPROM chip select), SR_CLK_O (EEPROM clock output), and SR_ORG (EEPROM
organization). The device may control a 93C56 or compatible parts using 2K bits. The EEPROM is used to
initialize a number of registers before enumeration. This is accomplished at start-up when RTS[0] is
de-asserted, at which time the data from the EEPROM is loaded. The EEPROM interface is organized into
a 16-bit base, and the device supplies a 7-bit EEPROM word address.
8.1. AUTO MODE EERPOM ACCESS
The device may access the EEPROM in a WORD or BYTE format, which is decided by the SR_ORG# at
start-up. If SR_ORG# is asserted at start-up, EEPROM is accessed using the WORD format. Otherwise,
Byte format is used.
8.2. EEPROM MODE AT RESET
During a reset, the device will automatically load the information/data from the EEPROM if the automatic
load condition is met. The first offset in the EEPROM contains a signature. If the signature is recognized,
and if RTS[0] is de-asserted, the autoload initiates right after the reset.
8.3. EEPROM SPACE ADDRESS MAP AND DESCRIPTION
EEPROM
ADDRESS
PCIE REGISTER OFFSET
DEFAULT
Value
DESCRIPTION
00h
A868h
Check Code
02h
Offset 00h bit[15:0]
12D8h
Vendor ID
04h
Offset 00h bit[31:16]
7952h
Device ID
06h
Offset 2Ch bit[15:0]
0000h
Subsytem Vendor ID
08h
Offset 2Ch bit[31:16]
0000h
Subsytem ID
0Ah
Bit[0] - Offset 80h bit[21]
0b
Device Specific Initialization: When set, the DSI is
required.
Bit[3:1] - Offset 80h bit[24:22]
111b
Aux. Current: When set, the I/O bridge needs 375
mA in D3 state.
Bit[4] - Offset 80h bit[25]
1b
D1 Support: When set, this bridge supports D1
Power Management state.
Bit[5] - Offset 80h bit[26]
1b
D2 Support: When set, this bridge supports D2
Power Management state.
Bit[10:6] - Offset 80h bit[31:27]
01000b
PME Support: When set, the PME supports D1 and
D2 Power Management states.
Bit[11] - Offset 84h bit[3]
1b
No Soft Reset: When set, the device does not
trigger the Internal Reset Command during the
transition from D3hot to D0 power state.
Bit[13:12] - Offset A8h bit[14:13]
00b
XPIP CSR0
0Ch
Offset B0h bit[15:0]
0000h
Replay Time-out Counter
0Eh
Offset B0h bit [31:16]
0000h
Acknowledge Latency Timer
10h
Bit[1:0] - Offset ECh bit[11:10]
11b
ASPM Capability Support: When set, this bridge
supports L0s and L1 entry
Bit[4:2] - Offset ECh bit[14:12]
011b
Exit L0s Latency Timer
Bit[7:5] - Offset ECh bit[17:15]
000b
Exit L1 Latency Timer
12h
Offset B4h bit[15:0]
0000h
UART Transmitter Drive Enable:
RS232/422/485-2W/485-4W Selection for UART 0
to 3
13-0092
相關PDF資料
PDF描述
PI7C9X7954AFDE IC PCIE-TO-UART BRIDGE 128LQFP
PI7C9X7958ANBE IC PCIE-TO-UART BRIDGE 160LFBGA
PI90LV017AUEX IC LVDS DIFF LINE DVR 3V 8-MSOP
PI90LV01TEX IC LVDS DIFF LINE DRVR SOT23-5
PI90LV027AW IC DUAL LVDS LINE DRIVER 8-SOIC
相關代理商/技術參數
參數描述
PI7C9X7952AFDEX 制造商:Pericom Semiconductor Corporation 功能描述:
PI7C9X7954AEVB 制造商:Pericom Semiconductor Corporation 功能描述:EVAL BOARD PI7C9X7954/52A
PI7C9X7954AFDE 功能描述:外圍驅動器與原件 - PCI X1 PCIE-UART 4 Channel Bridge RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
PI7C9X7958AEVB 制造商:Pericom Semiconductor Corporation 功能描述:7958A EVAL BOARD 制造商:Pericom Semiconductor Corporation 功能描述:EVAL BOARD PI7C9X7958A 制造商:Pericom Semiconductor Corporation 功能描述:8 Port PCI Express UART I/O Bridge Evaluation Board
PI7C9X7958ANBE 功能描述:外圍驅動器與原件 - PCI X1 PCIE-UART 8 Channel Bridge RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray