![](http://datasheet.mmic.net.cn/330000/PM7366_datasheet_16444405/PM7366_170.png)
RELEASED
DATA SHEET
PM7366 FREEDM-8
ISSUE 4
PMC-1970930
FRAME ENGINE AND DATA LINK MANAGER
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA,INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
157
CHAN[6:0]:
The indirect data bits (CHAN[6:0]) report the channel number read from the TMAC internal
memory after an indirect read operation has completed. Channel number to be written to the
TMAC internal memory in an indirect write operation must be set up in this register before
triggering the write. CHAN[6:0] reflects the value written until the completion of a subsequent
indirect read operation.
PROV:
The indirect provision enable bit (PROV) reports the channel provision enable flag read from
the TMAC internal memory after an indirect read operation has completed. The provision
enable flag to be written to the TMAC internal memory, in an indirect write operation, must be
set up in this register before triggering the write. When PROV is set high, the channel as
indicated by CHAN[6:0] is provisioned. When PROV is set low, the channel indicated by
CHAN[6:0] is unprovisioned. PROV reflects the value written until the completion of a
subsequent indirect read operation.
RWB:
The Read/Write Bar (RWB) bit selects between a provisioning/unprovisioning operation (write)
or a query operation (read). Writing a logic 0 to RWB triggers the provisioning or
unprovisioning of a channel as specified by CHAN[6:0] and PROV. Writing a logic 1 to RWB
triggers a query of the channel specified by CHAN[6:0].
BUSY:
The indirect access status bit (BUSY) reports the progress of an indirect access. BUSY is set
high when this register is written to trigger an indirect access, and will stay high until the
access is complete. At which point, BUSY will be set low. This register should be polled to
determine when data from an indirect read operation is available or to determine when a new
indirect write operation may commence.