參數資料
型號： TSC2302IRGZR
元件分類： Codec
英文描述： PROGRAMMABLE TOUCH SCREEN CONTROLLER WITH STEREO AUDIO CODEC
中文描述： 可編程觸摸屏控制器，立體聲編解碼器
文件頁數： 73/81頁
文件大?。?/td> 1211K
代理商： TSC2302IRGZR
www.ti.com
www.ti.com
TSC2302
SLAS394–JULY 2003
Bit 14 — AVPD
Audio VCM Power Down. If this is set to 1, the VCM powers up whenever it is needed (such as when the audio
ADC, DAC, or bypass path is enabled) and powers down when no longer needed. If this bit is set to 0, after an
audio component is powered up and causes VCM to power up, it no longer powers down, even if all audio
components are powered down. This is intended to avoid the 500 μs delay needed for VCM to power up slowly.
The default is 1 (powered down).
Bit 13 — ABPD
Audio Bypass Path Power Down. This is used to power up (set to 0) or power down (set to 1) the audio bypass
path. The default is 1 (powered down).
Bits 12 — HAPD
Headphone Amplifier Power Down. This is used to power up (set to 0) or power down (set to 1) the headphone
amplifier. The default is 1 (powered down).
Bit 11 — MOPD
Mono Driver Power Down. This is used to power up (set to 0) or power down (set to 1) the mono output driver. If
only playback of the line or Mic inputs through the mono output is needed, the user need only power up the
mono section, and not the DAC or ADCs. The line inputs, Mic preamp, left channel ADC multiplexer and left
channel volume control all power up if the mono output is powered up. The default is 1 (powered down).
Bit 10 — DAPD
DAC Power Down. This is used to power up (set to 0) or power down (set to 1) the entire stereo DAC. The
default is 1 (powered down).
Bit 9 — ADPDL
Left Channel ADC Power Down. This is used to power up (set to 0) or power down (set to 1) the entire left
channel ADC. The line inputs, Mic preamp, left channel ADC multiplexer and left channel volume control all
automatically power up when the left channel ADC is powered up. The default is 1 (powered down).
Bit 8 — ADPDR
Right Channel ADC Power Down. This is used to power up (set to 0) or power down (set to 1) the entire right
channel ADC. The line inputs, Mic preamp, right channel ADC multiplexer and right channel volume control all
automatically power up when the right channel ADC is powered up. The default is 1 (powered down).
Bit 7 — PDSTS
Power Up/Down Done. This read-only bit indicates that all power-up or power-down processes requested are
completed.
Table 41. Power Up/Down Flag
PDSTS
DESCRIPTION
0
Power up/down is not complete.
1
Power up/down is complete (default).
Bit 6 — MIBPD
Microphone Bias Power Down. This is used to power up (set to 0) or power down (set to 1) the microphone bias
output.
Table 42. Microphone Bias Power Down
OSCC
DESCRIPTION
0
Microphone bias is on.
1
Microphone bias is off (default).
73
相關PDF資料
PDF描述
TSC87C51 CMOS 0 to 25 MHz Programmable 8?bit Microcontroller
TSC87C51-25MGMQ CMOS 0 to 25 MHz Programmable 8?bit Microcontroller
TSC87C51-25MIMQ CMOS 0 to 25 MHz Programmable 8?bit Microcontroller
TSC87C51-25MJMQ CMOS 0 to 25 MHz Programmable 8?bit Microcontroller
TSM600-250-RA PolySwitch PTC Devices Overcurrent Protection Device
相關代理商/技術參數
參數描述
TSC2302IRGZRG4 功能描述:觸摸屏轉換器和控制器 Prog 4-Wire w/20-Bit Stereo Audio Codec RoHS:否 制造商:Microchip Technology 類型:Resistive Touch Controllers 輸入類型:3 Key 數據速率:140 SPS 分辨率:10 bit 接口類型:4-Wire, 5-Wire, 8-Wire, I2C, SPI 電源電壓:2.5 V to 5.25 V 電源電流:17 mA 工作溫度:- 40 C to + 85 C 封裝 / 箱體:SSOP-20
TSC2303IZQZ 制造商:Texas Instruments 功能描述:
TSC2303IZQZR 制造商:Texas Instruments 功能描述:
TSC236 制造商:TSC 制造商全稱:Taiwan Semiconductor Company, Ltd 功能描述:High Voltage NPN Transistor
TSC236CIC0 制造商:TSC 制造商全稱:Taiwan Semiconductor Company, Ltd 功能描述:High Voltage NPN Transistor
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*