
www.ti.com
1
F280x, C280x, UCD9501 DSPs
1.1
Features
High-Performance Static CMOS Technology
–
100 MHz (10-ns Cycle Time)
–
Low-Power (1.8-V Core, 3.3-V I/O) Design
–
3.3-V Flash Voltage
JTAG Boundary Scan Support
High-Performance 32-Bit CPU (TMS320C28x)
–
16 x 16 and 32 x 32 MAC Operations
–
16 x 16 Dual MAC
–
Harvard Bus Architecture
–
Atomic Operations
–
Fast Interrupt Response and Processing
–
Unified Memory Programming Model
–
Code-Efficient (in C/C++ and Assembly)
On-Chip Memory
–
F2809: 128K X 16 Flash, 18K X 16 SARAM
F2808: 64K X 16 Flash, 18K X 16 SARAM
F2806: 32K X 16 Flash, 10K X 16 SARAM
F2802: 32K X 16 Flash, 6K X 16 SARAM
F2801: 16K X 16 Flash, 6K X 16 SARAM
9501: 16K X 16 Flash, 6K X 16 SARAM
–
C2802: 32K X 16 ROM, 6K X 16 SARAM
C2801: 16K X 16 ROM, 6K X 16 SARAM
–
1K x 16 OTP ROM (F280x Only)
Boot ROM (4K x 16)
–
With Software Boot Modes (via SCI, SPI,
CAN, I
2
C, and Parallel I/O)
–
Standard Math Tables
Clock and System Control
–
Dynamic PLL Ratio Changes Supported
–
On-Chip Oscillator
–
Clock-Fail-Detect Mode
–
Watchdog Timer Module
Any GPIO A Pin Can Be Connected to One of
the Three External Core Interrupts
Peripheral Interrupt Expansion (PIE) Block
That Supports All 43 Peripheral Interrupts
128-Bit Security Key/Lock
–
Protects Flash/OTP/L0/L1 Blocks
–
Prevents Firmware Reverse Engineering
Enhanced Control Peripherals
–
Up to 16 PWM Outputs
–
Up to 4 HRPWM Outputs With 150 ps MEP
Resolution (6 HRPWM Outputs on F2809)
–
Up to Four Capture Inputs
–
Up to Two Quadrature Encoder Interfaces
TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, UCD9501
TMS320C2802, TMS320C2801 Digital Signal Processors
SPRS230G–OCTOBER 2003–REVISED FEBRUARY 2006
–
Three 32-Bit CPU Timers
Serial Port Peripherals
–
Up to 4 Serial Peripheral Interface (SPI)
Modules
–
Up to 2 Serial Communications Interface
(SCI), Standard UART Modules
–
Up to 2 CAN Modules
–
One Inter-Integrated-Circuit (I
2
C) Bus
12-Bit ADC, 16 Channels
–
2 x 8 Channel Input Multiplexer
–
Two Sample-and-Hold
–
Single/Simultaneous Conversions
–
Fast Conversion Rate: 160 ns/6.25 MSPS
(12.5 MSPS on F2809)
–
Internal or External Reference
Up to 35 Individually Programmable,
Multiplexed General-Purpose Input/Output
(GPIO) Pins With Input Filtering
Advanced Emulation Features
–
Analysis and Breakpoint Functions
–
Real-Time Debug via Hardware
Development Tools Include
–
ANSI C/C++ Compiler/Assembler/Linker
–
Supports TMS320C24x/240x Instructions
–
Code Composer Studio IDE
–
DSP/BIOS
–
JTAG Scan Controllers
(1)
[Texas Instruments (TI) or Third-Party]
–
Evaluation Modules
–
Broad Third-Party Digital Motor Control
Support
Low-Power Modes and Power Savings
–
IDLE, STANDBY, HALT Modes Supported
–
Disable Individual Peripheral Clocks
Package Options
–
Thin Quad Flatpack (PZ)
–
MicroStar BGA (GGM, ZGM)
Temperature Options:
–
A: -40°C to 85°C (PZ, GGM, ZGM)
–
S: -40°C to 125°C (PZ, GGM, ZGM)
–
Q: -40°C to 125°C (PZ)
Up to Six 32-bit/Six 16-bit Timers
(1)
IEEE Standard 1149.1-1990 Standard Test Access Port and
Boundary Scan Architecture
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this document.
UNLESS
PRODUCTIOTHERWISE
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
NOTED
this
document
contains
Copyright 2003–2006, Texas Instruments Incorporated