參數資料
型號： XRT75R03DIV
廠商： EXAR CORP
元件分類： 數字傳輸電路
英文描述： THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCRONIZER
中文描述： DATACOM, PCM TRANSCEIVER, PQFP128
封裝： 14 X 20 MM, LQFP-128
文件頁數： 78/134頁
文件大?。?/td> 803K
代理商： XRT75R03DIV
XRT75R03D
REV. 1.0.2
THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCRONIZER
73
3
FL Alarm Declared
R/O
0
FL (FIFO Limit) Alarm Declared:
This READ-ONLY bit-field indicates whether or not the Jit-
ter Attenuator block (within Channel_n) is currently declar-
ing the FIFO Limit Alarm.
The Jitter Attenuator block will declare the FIFO Limit
Alarm anytime the Jitter Attenuator FIFO comes within two
bit-periods of either overflowing or under-running.
Conversely, the Jitter Attenuator block will clear the FIFO
Limit Alarm anytime the Jitter Attenuator FIFO is NO
longer within two bit-periods of either overflowing or under-
running.
Typically, this Alarm will only be declared whenever there is
a very serious problem with timing or jitter in the system.
0 - Indicates that the Jitter Attenuator block (within
Channel_n) is NOT currently declaring the FIFO Limit
Alarm condition.
1 - Indicates that the Jitter Attenuator block (within
Channel_n) is currently declaring the FIFO Limit Alarm
condition.
N
OTE
:
This bit-field is only active if the Jitter Attenuator
(within Channel_n) has been enabled.
2
Receive LOL Con-
dition Declared
R/O
0
Receive LOL (Loss of Lock) Condition Declared:
This READ-ONLY bit-field indicates whether or not the
Receive Section (within Channel_n) is currently declaring
the LOL (Loss of Lock) condition.
The Receive Section (of Channel_n) will declare the LOL
Condition, if any one of the following conditions are met.
If the frequency of the Recovered Clock signal differs
from that of the signal provided to the E3CLK input (for
E3 applications), the DS3CLK input (for DS3
applications) or the STS-1CLK input (for STS-1
applications) by 0.5% (or 5000ppm) or more.
If the frequency of the Recovered Clock signal differs
from the line-rate clock signal (for Channel_n) that has
been generated by the SFM Clock Synthesizer PLL (for
SFM Mode Operation) by 0.5% (or 5000ppm) or more.
0 - Indicates that the Receive Section of Channel_n is NOT
currently declaring the LOL Condition.
1 - Indicates that the Receive Section of Channel_n is cur-
rently declaring the LOL Condition.
B
IT
N
UMBER
N
AME
T
YPE
D
EFAULT
V
ALUE
D
ESCRIPTION
相關PDF資料
PDF描述
XRT75R03 THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
XRT75R03IV THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
XRT75R06D SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
XRT75R06DIB SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
XRT75R06 SIX CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
相關代理商/技術參數
參數描述
XRT75R03DIV-F 功能描述:網絡控制器與處理器 IC 3-Ch E3/DS3/STS-1 RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
XRT75R03DIVTR 功能描述:時鐘合成器/抖動清除器 3CHNNEL E3/DS3/STS 1 JITTER ATTENUATOR RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75R03DIVTR-F 功能描述:接口 - 專用 RoHS:否 制造商:Texas Instruments 產品類型:1080p60 Image Sensor Receiver 工作電源電壓:1.8 V 電源電流:89 mA 最大功率耗散: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:BGA-59
XRT75R03ES 功能描述:時鐘合成器/抖動清除器 3CH T3/E3/STS1LIU+JA 3.3V W/REDUNDANCY RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75R03IV 功能描述:外圍驅動器與原件 - PCI 3CHNNEL E3/DS3/STS 1 JITTER ATTENUATOR RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*