E
SEE NEW DESIGN RECOMMENDATIONS
December 1997
Order Number: 290489-005
n
User-Selectable 3.3 V or 5 V V
CC
n
User-Configurable x8 or x16 Operation
n
70 ns Maximum Access Time
n
28.6 MB/sec Burst Write Transfer Rate
n
1 Million Typical Erase Cycles per
Block
n
56-Lead, 1.2 mm x 14 mm x 20 mm
TSOP Package
n
56-Lead, 1.8 mm x 16 mm x 23.7 mm
SSOP Package
n
Revolutionary Architecture
Pipelined Command Execution
Program during Erase
Command Superset of Intel
28F008SA
n
1 mA Typical I
CC
in Static Mode
n
1 μA Typical Deep Power-Down
n
32 Independently Lockable Blocks
n
State-of-the-Art 0.6 μm ETOX IV Flash
Technology
Intel’s 28F016SA 16-Mbit FlashFile memory is a revolutionary architecture which is the ideal choice for
designing embedded direct-execute code and mass storage data/file flash memory systems. With innovative
capabilities, low-power, extended temperature operation and high read/program performance, the 28F016SA
enables the design of truly mobile, high-performance communications and computing products.
The 28F016SA is the highest density, highest performance nonvolatile read/program solution for solid-state
storage applications. Its symmetrically-blocked architecture (100% compatible with the 28F008SA 8-Mbit
FlashFile memory), extended cycling, extended temperature operation, flexible V
CC
, fast program and read
performance and selective block locking provide highly flexible memory components suitable for Resident
Flash Arrays, high-density memory cards and PCMCIA-ATA flash drives. The 28F016SA dual read voltage
enables the design of memory cards which can be interchangeably read/written in 3.3 V and 5.0 V systems.
Its x8/x16 architecture allows optimization of the memory-to-processor interface. Its high read performance
and flexible block locking enable both storage and execution of operating systems and application software.
Manufactured on Intel’s 0.6 μm ETOX IV process technology, the 28F016SA is the most cost-effective,
highest density monolithic 3.3 V FlashFile memory.
New Design Recommendations:
For new 3.3 V V
CC
designs with this device, Intel recommends using 16-Mbit Word-Wide FlashFile
memory. Reference Word-Wide FlashFile Memory Family 28F160S3, 28F320S3
datasheet, order number
290608. For new 3.3 V V
CC
x8 I/O designs with this device, Intel recommends using the 16-Mbit Byte-Wide
Smart 3 FlashFile memory. Reference Byte-Wide Smart 3 FlashFile Memory Family
datasheet, order
number 290598.
For new 5 V V
CC
designs with this device, Intel recommends using the 16-Mbit Word-Wide FlashFile
memory. Reference Word-Wide FlashFile Memory Family 28F160S5, 28F320S5
datasheet, order number
290609. For new 5 V V
CC
x8 I/O designs with this device, Intel recommends using the 16-Mbit Byte-Wide
Smart 5 FlashFile memory. Reference Byte-Wide Smart 5 FlashFile Memory Family
datasheet, order
number 290597.
These
documents
are
also
available
at
Intel’s
website,
http://www.intel.com/design/flcomp.
REFERENCE ONLY
28F016SA FlashFile MEMORY
Includes Commercial and Extended Temperature Specifications