參數資料
型號: 73S1217F-EB-LITE
廠商: Maxim Integrated Products
文件頁數: 38/93頁
文件大?。?/td> 0K
描述: BOARD EVAL 73S1217F CBL/DOC/CD
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 1
系列: *
UG_12xxF_016
73S12xxF Software User Guide
Rev. 1.50
43
The USB interface contains four endpoints, which are defined as follows:
1.
Endpoint 0 for the control transfer
2.
Endpoint 1 IN for the Bulk transfer
3.
Endpoint 1 OUT for the Bulk transfer
4.
Endpoint 2 IN for the interrupt transfer
The Low-level API handles all Endpoint 0 (control endpoint) communications; thus PC driver enumeration
takes place during the device reset time and is transparent to an application. An application can be
written to monitor this reset signal to determine when it can start sending Endpoint 1 IN and/or Endpoint
2 IN packets to the host or to expect Endpoint 1 OUT packets from the host. (References to
transmission direction (IN/OUT) are relative to the host.)
USB_Init()
Purpose
Configure the USB interface during the reset procedure. The descriptors (device,
configuration, endpoint, interface and string) used in future enumeration requests are
configured. When leaving this function, the USB interface is ready to answer any
enumeration request.
Synopsis
Void USB_Init (
IN struct USB_Init_t *pUSB,
IN struct USB_LangID_t *pLangID,
IN void (*pRESET) (),
IN void (*pSUSPEND) (),
IN void (*pRESUME) () );
struct USB_Init_t
{
struct USB_Device_t
Device;
struct USB_Config_t
Config;
struct USB_CCID_t
CCID;
struct USB_Strings_t
Strings;
};
The Device, Config, CCID, Strings and LangID structures are described at the end of
this function description.
Parameters
pUSB: Input parameter
Specifies the Device, Configuration, Endpoints, Interfaces and String Descriptors
defining the USB interface.
pLangID: Input parameter
Specifies the Language ID codes String Descriptor.
pRESET: Input parameter
Specifies a pointer to the function to call when RESET signaling has occurred on the
USB bus.
pSUSPEND: Input parameter
Specifies a pointer to the function to call when SUSPEND signaling has occurred on
the USB bus.
pRESUME: Input parameter
Specifies a pointer to the function to call when RESUME signaling has occurred on
the USB bus.
Return Codes
None.
This function will activate the USB interface and ALL Endpoints will be ACTIVE. Endpoint 0 gets device
descriptor requests and will return the device descriptor. Endpoint 0 gets configuration descriptor
相關PDF資料
PDF描述
UPT2D221MHD6 CAP ALUM 220UF 200V 20% RADIAL
MAX5391NEVMINIQU+ EVAL KIT MAX5391
GSC08DRTN-S93 CONN EDGECARD 16POS DIP .100 SLD
CM453232-R56KL INDUCTOR 560NH 520MA SMD
REC15-1212D/H3 CONV DC/DC 15W 12VIN +/-12VOUT
相關代理商/技術參數
參數描述
73S1217F-IMR/F 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Bus-Powered 80515 System-on-Chip with USB, ISO 7816 / EMV, PINpad and More
73S13B 制造商:QUARTZCOM 制造商全稱:QUARTZCOM the communications company 功能描述:-20 ~ +70 °C commercia l application -30 ~ +75 °C on request
73S5040G01X0A 制造商:NEX Computers 功能描述:INTEL 40GB SSD - Bulk
73S8009C 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Versatile Power Management and Smart Card Interface IC
73S8009C-20IM/F 功能描述:輸入/輸出控制器接口集成電路 Smart Card Interface IC RoHS:否 制造商:Silicon Labs 產品: 輸入/輸出端數量: 工作電源電壓: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-64 封裝:Tray