參數資料
型號: ADV7183ABST
廠商: ANALOG DEVICES INC
元件分類: 顏色信號轉換
英文描述: Multiformat SDTV Video Decoder
中文描述: COLOR SIGNAL DECODER, PQFP80
封裝: LEAD FREE, MS-026-BEC, LQFP-80
文件頁數: 37/104頁
文件大?。?/td> 894K
代理商: ADV7183ABST
ADV7183A
SDP DIGITAL NOISE REDUCTION (DNR)
Digital noise reduction is based on the assumption that high
frequency signals with low amplitude are probably noise, and
that their removal therefore improves picture quality.
Rev. A | Page 37 of 104
DNR_EN Digital Noise Reduction Enable (SDP),
Address 0x4D, [5]
The DNR_EN bit enables the DNR block or bypasses it.
Table 80. DNR_EN Function
DNR_EN
Description
0
Bypass DNR (disable).
1*
Enable digital noise reduction on the luma data.
DNR_TH[7:0] DNR Noise Threshold, Address 0x50, [7:0]
The DNR_TH[7:0] value is an unsigned 8-bit number used to
determine the maximum edge that will be interpreted as noise
and therefore blanked from the luma data. Programming a large
value into DNR_TH[7:0] causes the DNR block to interpret
even large transients as noise and remove them. The effect on
the video data will therefore be more visible.
Programming a small value causes only small transients to be
seen as noise and to be removed.
It should be noted that the recommended DNR_TH[7:0] setting
for A/V inputs is 0x04, and the recommended DNR_TH[7:0]
setting for tuner inputs is 0x0A.
Table 81. DNR_TH Function
DNR_TH[7:0]
Description
0x08*
Threshold for maximum luma edges to be
interpreted as noise.
*Default value.
SDP COMB FILTERS
The comb filters of the ADV7183A have been greatly improved
to automatically handle video of all types, standards, and levels
of quality. Two user registers are available to customize comb
filter operation.
Depending on whichever video standard has been detected (by
autodetection) or selected (by manual programming), the
NTSC or PAL configuration registers are used. In addition to
the bits listed in this section, there are some further ADI
internal controls; please contact ADI for more information.
NTSC Comb Filter Settings
Used for NTSC-M/J CVBS inputs.
NSFSEL[1:0] Split Filter Selection NTSC (SDP),
Address 0x19, [3:2]
The NSFSEL[1:0] control selects how much of the overall signal
bandwidth is fed to the combs. A narrow split filter selection
gives better performance on diagonal lines, but leaves more dot
crawl in the final output image. The opposite is true for
selecting a wide bandwidth split filter.
Table 82.NSFSEL Function
NSFSEL[1:0]
00*
01
10
11
*Default value.
Description
Narrow
Medium
Medium
Wide
CTAPSN[1:0] Chroma Comb Taps NTSC (SDP),
Address 0x38, [7:6]
Table 83. CTAPSN Function
CTAPSN[1:0]
Description
00
Do not use.
01
NTSC chroma comb adapts 3 lines (3 taps) to
2 lines (2 taps).
10*
NTSC chroma comb adapts 5 lines (5 taps) to
3 lines (3 taps).
11
NTSC chroma comb adapts 5 lines (5 taps) to
4 lines (4 taps).
*Default value.
相關PDF資料
PDF描述
ADV7183AKST Multiformat SDTV Video Decoder
ADV7330 Multiformat 11-Bit Triple DAC Video Encoder
ADV7330KST Multiformat 11-Bit Triple DAC Video Encoder
ADXL321 Small and Thin 18 g Accelerometer
ADXL321EB Small and Thin 18 g Accelerometer
相關代理商/技術參數
參數描述
ADV7183AKST 制造商:Analog Devices 功能描述:MULTIFORMAT SDTV VIDEO DECODER 制造商:Rochester Electronics LLC 功能描述:10BIT NTSC/PAL/SECAMVIDDECOD I.C - Tape and Reel 制造商:Analog Devices 功能描述:IC VIDEO ENCODER
ADV7183AKST-U1 制造商:Analog Devices 功能描述:VID DECODER 80LQFP - Bulk
ADV7183AKST-X2 制造商:Analog Devices 功能描述:VID DECODER - Bulk
ADV7183AXST 制造商:Analog Devices 功能描述:VIDEO DECODER I.C. - Bulk
ADV7183AXST-X2 制造商:Analog Devices 功能描述:VIDEO DECODER I.C. - Bulk