參數資料
型號： DS21Q59LN+
廠商： Maxim Integrated Products
文件頁數： 15/76頁
文件大?。?/td> 0K
描述： IC TXRX E1 QUAD 100-LQFP
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 90
類型： 收發器
驅動器/接收器數： 4/4
規程： E1
電源電壓： 4.75 V ~ 5.25 V
安裝類型： 表面貼裝
封裝/外殼： 100-LQFP
供應商設備封裝： 100-LQFP（14x14）
包裝： 托盤
DS21Q59 Quad E1 Transceiver
22 of 76
8.3 Automatic Alarm Generation
The device can be programmed to automatically transmit AIS or remote alarm. When automatic AIS generation is
enabled (CCR2.5 = 1), the device monitors the receive framer to determine if any of the following conditions are
present: loss-of-receive frame synchronization, AIS alarm (all ones) reception, or loss-of-receive carrier (or signal).
If one (or more) of these conditions is present, the framer forces an AIS alarm.
When automatic RAI generation is enabled (CCR2.4 = 1), the receiver is monitored to determine if any of the
following conditions are present: loss-of-receive frame synchronization, AIS alarm (all ones) reception, or loss-of-
receive carrier (or signal), or if CRC4 multiframe synchronization cannot be found within 128ms of FAS
synchronization (if CRC4 is enabled). If one (or more) of these conditions is present, the device transmits an RAI
alarm. RAI generation conforms to ETS 300 011 specifications, and a constant remote alarm is transmitted if the
DS21Q59 cannot find CRC4 multiframe synchronization within 400ms as per G.706.
Register Name:
CCR3
Register Description:
Common Control Register
Register Address:
14 Hex
Bit #
7
6
5
4
3
2
1
0
Name
RLB
LLB
LIAIS
TCM4
TCM3
TCM2
TCM1
TCM0
NAME
BIT
FUNCTION
RLB
7
Remote Loopback. See Section 8.4 for details.
0 = loopback disabled
1 = loopback enabled
LLB
6
Local Loopback. See Section 8.5 for details.
0 = loopback disabled
1 = loopback enabled
LIAIS
5
Line Interface AIS-Generation Enable
0 = allow normal data to be transmitted at TTIP and TRING
1 = force unframed all ones to be transmitted at TTIP and TRING at the
MCLK rate
TCM4
4
Transmit Channel Monitor Bit 4. MSB of a channel decode that
determines which transmit channel data appears in the TDS0M register.
See Section 10 or details.
TCM3
3
Transmit Channel Monitor Bit 3
TCM2
2
Transmit Channel Monitor Bit 2
TCM1
1
Transmit Channel Monitor Bit 1
TCM0
0
Transmit Channel Monitor Bit 0. LSB of the channel decode.
8.4 Remote Loopback
When CCR4.7 is set to 1, the DS21Q59 is forced into remote loopback (RLB) mode. In this loopback, data input
through the RPOSI and RNEGI pins is transmitted back to the TPOSO and TNEGO pins. Data continues to pass
through the DS21Q59’s receive framer as it would normally and the data from the transmit formatter is ignored
相關PDF資料
PDF描述
DS21S07AS+T&R IC TERMINATOR SCSI 16-SOIC
DS21T05Z/T&R IC TERMINATOR SCSI 150MIL 16SOIC
DS21T07S+T&R IC TERMINATOR SCSI 16-SOIC
DS2250-64-16+ IC MCU 64KB 16MHZ 40-SIMM
DS2251T-128-16 IC MICROCNTRLR 128K 16MHZ 72SIMM
相關代理商/技術參數
參數描述
DS21Q59LN+ 功能描述:網絡控制器與處理器 IC Quad E1 Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21S07A 制造商:Maxim Integrated Products 功能描述:
DS21S07AE 功能描述:SCSI 接口集成電路 RoHS:否 制造商:Texas Instruments 工作電源電壓:2.7 V to 5.25 V 電源電流:13 mA 最大工作溫度:+ 70 C 最小工作溫度:0 C 安裝風格:SMD/SMT 封裝 / 箱體:SSOP-36 封裝:Tube
DS21S07AE/T 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:SCSI Terminator
DS21S07AE/T&R 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: 制造商:Maxim Integrated Products 功能描述:IC TERMINATOR SCSI 20-TSSOP
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*