參數資料
型號： DS3148N
廠商： Maxim Integrated Products
文件頁數： 30/89頁
文件大?。?/td> 0K
描述： IC 8CH DS3/3 FRAMER 349-BGA
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 1
控制器類型： DS3/E3 調幀器
接口： LIU
電源電壓： 3.135 V ~ 3.465 V
電流 - 電源： 640mA
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 349-BGA 裸露焊盤
供應商設備封裝： 349-HCBGA（27x27）
包裝： 托盤
DS3146/DS3146/DS31412 6-/8-/12-Channel DS3/E3 Framers
36 of 89
Register Name:
T3E3EIC
Register Description:
DS3/E3 Error Insert Control Register
Register Address:
12h
Bit #
7
6
5
4
3
2
1
0
Name
MEIMS
FBEIC1
FBEIC0
FBEI
T3CPBEI
T3PBEI
EXZI
BPVI
Default
0
Bit 0: Bipolar Violation Insert (BPVI). A 0-to-1 transition on this bit causes a single BPV to be inserted into the
transmit data stream during the next occurrence of three consecutive 1s. This bit must be cleared and set again for
a subsequent BPV to be inserted. Toggling this bit has no effect when the LIU interface is in the binary mode. In
the manual error insert mode (MEIMS = 1), errors are inserted on each toggle of the TMEI input signal as long as
this bit is logic 1. When this bit is logic 0, no BPVs are inserted.
Bit 1: Excessive Zero Insert (EXZI). A 0-to-1 transition on this bit causes a single EXZ event to be inserted into
the transmit data stream. An EXZ event is defined as three or more consecutive 0s in the DS3 mode and four or
more consecutive 0s in the E3 mode. After this bit has been toggled from logic 0 to logic 1, the formatter
suppresses the next possible B3ZS/HDB3 codeword substitution to create the EXZ event. This bit must be cleared
and set again for a subsequent EXZ event to be inserted. Toggling this bit has no effect when the LIU interface is in
the binary mode. In the manual error insert mode (MEIMS = 1), errors are inserted on each toggle of the TMEI
input signal as long as this bit is logic 1. When this bit is logic 0, no EXZ events are inserted.
Bit 2: DS3 P-Bit Parity Error Insert (T3PBEI). A 0-to-1 transition on this bit causes a single DS3 P-bit parity error
event to be inserted into the transmit data stream. A DS3 P-bit parity error is defined as inverting both P bits in a
DS3 frame. Once this bit has been toggled from logic 0 to logic 1, the formatter flips both P bits in the next DS3
frame. This bit must be cleared and set again for a subsequent error to be inserted. Toggling this bit has no effect
when the framer is operated in the E3 mode. In the manual error insert mode (MEIMS = 1), errors are inserted on
each toggle of the TMEI input signal as long as this bit is logic 1. When this bit is logic 0, no P-bit parity errors are
inserted.
Bit 3: DS3 C-Bit Parity Error Insert (T3CPBEI). A 0-to-1 transition on this bit causes a single DS3 CP-bit parity
error event to be inserted into the transmit data stream. A DS3 CP-bit parity error is defined as inverting the proper
polarity of all three CP bits in a DS3 frame. Once this bit has been toggled from logic 0 to logic 1, the framer flips all
three CP bits in the next DS3 frame. This bit must be cleared and set again for a subsequent error to be inserted.
Toggling this bit has no effect when the framer is not operated in C-Bit Parity mode or when the framer is operated
in the E3 mode. In the manual error insert mode (MEIMS = 1), errors are inserted on each toggle of the TMEI input
signal as long as this bit is logic 1. When this bit is logic 0, no CP-bit parity errors are inserted.
Bit 4: Frame Bit-Error Insert (FBEI). A 0-to-1 transition on this bit causes the transmit framer to generate framing
bit errors. The type of framing bit error to be inserted is controlled by the FBEIC[1:0] bits. Once this bit has been
toggled from logic 0 to logic 1, the framer inserts framing bit errors in the next possible frame. This bit must be
cleared and set again for a subsequent error to be inserted. In the manual error insert mode (MEIMS = 1), errors
are inserted on each toggle of the TMEI input signal as long as this bit is logic 1. When this bit is logic 0, no frame
bit errors are inserted.
Bits 5, 6: Frame Bit-Error Insert Control Bits 0 and 1 (FBEIC[1:0])
FBEIC[1:0]
TYPE OF FRAMING BIT ERROR INSERTED
00
DS3 Mode: A single F-bit error
E3 Mode: A single FAS word of 1111110000 is generated instead of the normal FAS word, which is
1111010000 (i.e., only 1 bit inverted)
01
DS3 Mode: A single M-bit error
E3 Mode: A single FAS word of 0000101111 is generated instead of the normal FAS word, which is
1111010000 (i.e., all FAS bits are inverted)
10
DS3 Mode: Four consecutive F-bit errors (causes the far end to lose synchronization)
E3 Mode: Four consecutive FAS words of 1111110000 are generated instead of the normal FAS word,
which is 1111010000 (i.e., only 1 bit inverted; causes the far end to lose synchronization)
11
DS3 Mode: Three consecutive M-bit errors (causes the far end to lose synchronization)
E3 Mode: Four consecutive FAS words of 0000101111 are generated instead of the normal FAS word,
which is 1111010000 (i.e., all FAS bits are inverted; causes the far end to lose synchronization)
相關PDF資料
PDF描述
VI-24K-IX-S CONVERTER MOD DC/DC 40V 75W
PIC16C54C-20E/SO IC MCU OTP 512X12 18SOIC
PIC16C54C-04E/SS IC MCU OTP 512X12 20SSOP
PIC12C509T-04/SM IC MCU OTP 1KX12 8-SOIJ
PIC12C508T-04I/SM IC MCU OTP 512X12 8-SOIJ
相關代理商/技術參數
參數描述
DS315 制造商:Hubbell Wiring Device-Kellems 功能描述:SWITCH, DECO SER, 3W, 15A 120/277V, BR
DS3150 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:3.3V, DS3/E3/STS-1 Line Interface Unit
DS3150DK 功能描述:網絡開發工具 DS3150 Dev Kit RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
DS3150G 功能描述:IC LIU T3/E3/STS-1 49-BGA RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:25 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:4.5 V ~ 5.5 V 安裝類型:通孔 封裝/外殼:16-DIP（0.300"，7.62mm） 供應商設備封裝:16-PDIP 包裝:管件
DS3150GN 功能描述:IC LIU T3/E3/STS-1 IND 49-BGA RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:25 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:4.5 V ~ 5.5 V 安裝類型:通孔 封裝/外殼:16-DIP（0.300"，7.62mm） 供應商設備封裝:16-PDIP 包裝:管件
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*