參數資料
型號： ML60851D
廠商： OKI SEMICONDUCTOR CO., LTD.
英文描述： USB Device Controller
中文描述： USB設備控制器
文件頁數： 65/82頁
文件大?。?/td> 705K
代理商： ML60851D
FEDL60851D-01
1
Semiconductor
ML60851D
65/82
Interrupts
The ML60851D requests interrupts to the local MCU, etc., by asserting the -INTR pin. The interrupt causes are
the following:
(a) Setup ready for the 8-byte setup data
(b) EP0 receive packet ready
(c) EP0 transmit packet ready
(d) EP1 transmit/receive packet ready
(e) EP2 transmit/receive packet ready
(f)
EP3 transmit packet ready
(g)
USB Bus reset
(h)
Suspend
Although there is only one
INTR
pin, the local MCU can identify the contents of the interrupt by reading out the
interrupt status register. These interrupts can also be masked dynamically by making individual settings in the
interrupt enable register.
The causes of the interrupts, their setting and resetting conditions, and the responses to them are described below.
The functions of the setup ready bit and the packet ready bit can, in some situations, be different from those
described here because of some special automatic operations done by the ML60851D. Please see the descriptions
of the registers EP0STAT and PKTRDY for more details of such functions.
(1) Setup ready interrupt
Operation
Source of operation
ML60851D
Description (conditions, responses, etc.)
The setup ready bit (D0 of EP0STAT) is asserted when the
8-byte setup control data is received normally and has
been stored in the set of setup registers.
An interrupt is generated at this time if D0 of INTENBL has
been asserted.
→
The firmware can now read the set of setup registers.
After making the firmware read the 8-byte setup data, write
a “1” in bit D0 of EP0 status register (EP0STAT). This
causes the interrupt to be de-asserted.
The interrupt will not be de-asserted If a new 8-byte setup
data is received during this period. In this case, discard the
setup data that was being read at that time and read the
new 8-byte setup data.
Setup ready
interrupt generation
End of setup ready interrupt Local MCU (firmware)
相關PDF資料
PDF描述
ML60852 USB Device Controller
ML6190A Longwave Time Code RF Receiver LSI
ML63187 4-Bit Microcontroller with Built-in 1024-Dot Matrix LCD Drivers and Melody Circuit, Operating at 0.9 V (Min).
ML63189B 4-Bit Microcontroller with Built-in 1024-Dot Matrix LCD Drivers and Melody Circuit, Operating at 0.9 V (Min).
ML63512A 4-Bit Microcontroller with Built-in Level Detector, Melody Circuit, and Comparator,Operating at 0.9 V (Min.)
相關代理商/技術參數
參數描述
ML60851E 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:USB Device Controller
ML60851EGA 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:USB Device Controller
ML60851ETB 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:USB Device Controller
ML60852 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:USB Device Controller
ML60852A 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:USB Device Controller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*