參數資料
型號: POE-VOICE-RD
廠商: Silicon Laboratories Inc
文件頁數: 19/108頁
文件大?。?/td> 0K
描述: KIT REF DESIGN PWR OVER ETHERNET
標準包裝: 1
主要目的: 參考設計,以太網供電(POE),語音傳輸
嵌入式: 是,MCU,8 位
已用 IC / 零件: C8051F340,CP2201,Si3400
主要屬性: 嵌入式以太網,以太網供電,8 kHz 語音采樣系統
次要屬性: 圖形用戶界面
已供物品: 板,線纜,電源,軟件
產品目錄頁面: 626 (CN2011-ZH PDF)
相關產品: 336-1385-ND - IC POWER OVER ETHERNET 20QFN
336-1322-ND - IC POWER OVER ETHERNET 20QFN
336-1313-ND - IC ETH CTRLR SNGL-CHIP 28QFN
336-1298-ND - IC 8051 MCU FLASH 64K 48TQFP
其它名稱: 336-1326
CP2200/1
18
Rev. 1.0
6. Functional Description
6.1. Overview
In most systems, the CP2200/1 is used for transmitting and receiving Ethernet packets, non-volatile data storage,
and controlling Link and Activity LEDs. The device is controlled using direct and indirect internal registers
accessible through the parallel host interface. All digital pins on the device are 5 V tolerant.
6.2. Reset Initialization
After every CP2200/1 reset, the following initialization procedure is recommended to ensure proper device
operation:
Step 1: Wait for the reset pin to rise. This step takes the longest during a power-on reset.
Step 2: Wait for Oscillator Initialization to complete. The host processor will receive notification through the
interrupt request signal once the oscillator has stabilized.
Step 3: Wait for Self Initialization to complete. The INT0 interrupt status register on page 31 should be
checked to determine when Self Initialization completes.
Step 4: Disable interrupts (using INT0EN and INT1EN on page 33 and page 36) for events that will not be
monitored or handled by the host processor. By default, all interrupts are enabled after every reset.
Step 5: Initialize the physical layer. See “15.7. Initializing the Physical Layer” on page 90 for a detailed
physical layer initialization procedure.
Step 6: Enable the desired Activity, Link, or Activity/Link LEDs using the IOPWR register on page 45.
Step 7: Initialize the media access controller (MAC). See “14.1. Initializing the MAC” on page 78 for a
detailed MAC initialization procedure.
page 59 for a detailed initialization procedure.
Step 9: The CP2200/1 is ready to transmit and receive packets.
6.3. Interrupt Request Signal
The CP2200/1 has an interrupt request signal (INT) that can be used to notify the host processor of pending
interrupts. The INT signal is asserted upon detection of any enabled interrupt event. Host processors that cannot
dedicate a port pin to the INT signal can periodically poll the interrupt status registers to see if any interrupt
generating events have occurred. If the /INT signal is not used, pending interrupts such a Receive FIFO Full must
still be serviced.
The 14 interrupt sources are listed below. Interrupts are enabled on reset and can be disabled by software.
Pending interrupts can be cleared (allowing the INT signal to de-assert) by reading the self-clearing interrupt
registers. See “8. Interrupt Sources” on page 30 for a complete description of the CP2200/1 interrupts.
End of Packet Reached
Packet Received
Receive FIFO Empty
“Wake-on-LAN” Wakeup Event
Receive FIFO Full
Link Status Changed
Oscillator Initialization Complete
Jabber Detected
Self Initialization Complete
Auto-Negotiation Failed
Flash Write/Erase Complete
Remote Fault Notification
Packet Transmitted
Auto-Negotiation Complete
相關PDF資料
PDF描述
CW252016-R10G INDUCTOR 100NH 1008 SMD
GBA31DCBI CONN EDGECARD 62POS R/A .125 SLD
EBC18DRTH-S93 CONN EDGECARD 36POS DIP .100 SLD
ABM10DSUH CONN EDGECARD 20POS .156 DIP SLD
UPZ2D331MHD6 CAP ALUM 330UF 200V 20% RADIAL
相關代理商/技術參數
參數描述
POF 1200AE 制造商:Bosch Sensortec 功能描述:ROUTER 1200W
POF 1400ACE 制造商:Bosch Sensortec 功能描述:ROUTER, 1400W
POF-12664 功能描述:PUSH-ON FEET BLK .62 X .20" RoHS:是 類別:硬件,緊固件,配件 >> 緩沖器,支腳,焊盤,握把 系列:POF MSDS 材料安全數據表:MB1102,1200, SJ5300,5400,5600,5900,6000 MSDS 產品目錄繪圖:Resilient Rollstock 標準包裝:1 系列:SJ-5900 形狀:矩形,扁平 - 可定制 顏色:黑 尺寸:卷 - 1' L x 9.000" W x 0.250" H(304.80mm x 228.60mm x 6.35mm)1/4" H 尺寸 - 可視:卷 - 1' L x 9.000" W x 0.250" H(304.80mm x 228.60mm x 6.35mm)1/4" H 材質:聚氨脂泡沫 安裝類型:膠合劑 - 丙烯酸 其它名稱:SJ5904-1FT
POF-12664-10PK 制造商:Richco 功能描述:Push On Feet; PVC (Flexible); Black; 15.7 mm; 8.6 mm; 1.3 mm; 7 mm
POF-40022 功能描述:PUSH-ON FEET BLK .31 X .06" RoHS:是 類別:硬件,緊固件,配件 >> 緩沖器,支腳,焊盤,握把 系列:POF MSDS 材料安全數據表:MB1102,1200, SJ5300,5400,5600,5900,6000 MSDS 產品目錄繪圖:Resilient Rollstock 標準包裝:1 系列:SJ-5900 形狀:矩形,扁平 - 可定制 顏色:黑 尺寸:卷 - 1' L x 9.000" W x 0.250" H(304.80mm x 228.60mm x 6.35mm)1/4" H 尺寸 - 可視:卷 - 1' L x 9.000" W x 0.250" H(304.80mm x 228.60mm x 6.35mm)1/4" H 材質:聚氨脂泡沫 安裝類型:膠合劑 - 丙烯酸 其它名稱:SJ5904-1FT