參數資料
型號： XRT75L00DIV
廠商： EXAR CORP
元件分類： 數字傳輸電路
英文描述： E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
中文描述： DATACOM, PCM TRANSCEIVER, PQFP52
封裝： 10 X 10 MM, TQFP-52
文件頁數： 12/92頁
文件大?。?/td> 894K
代理商： XRT75L00DIV
XRT75L00D
E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
REV. 1.0.2
7
37
RNEG/LCV
O
Receive Negative Data Output/Line Code Violation Indicator
Function of these pins depends on whether the XRT75L00D is configured
in Single Rail or Dual Rail mode.
If the XRT75L00D is configured in Dual Rail mode, a negative pulse is output
through RNEG.
In Hardware mode:
Tie the pin SR/DR
(pin 22) “High” to configure the
XRT75L00D in Single Rail mode and tie
“Low” to configure in Dual Rail mode.
In HOST mode:
XRT75L00D can be configured in Single Rail or Dual Rail by
setting or clearing the bit in the block control register.
Line Code Violation Indicator
If the XRT75L00D is configured in Single Rail mode then:
Whenever the Receiver Section detects a Line Code violation, it pulses this
output pin “High”. This output pin remains “Low” at all other times. It is
advisable to sample this output pin using the RxClk output signal.
11
RRING
I
Receive Ring Input
This input pin along with RTIP is used to receive the bipolar line signal from the
Remote DS3/E3/STS-1 Terminal.
12
RTIP
I
Receive TIP Input
This input pin along with RRNG is used to receive the bipolar line signal from
the Remote DS3/E3/STS-1 Terminal.
27
RxMON/
SDO
I
Receive Monitoring Mode or Serial Data Output:
In Hardware mode,
when this pin is tied “High” XRT75L00D configures into
monitoring channel. In the monitoring mode, the Receiver is capable of monitor-
ing the signals with 20 dB flat loss plus 6 dB cable attenuation. This allows to
monitor very weak signal before declaring LOS.
In HOST Mode, XRT75L00D can be configured to be a monitoring channel by
setting the bits in the receive control register.
N
OTE
:
If the XRT75L00D is configured in HOST mode, this pin functions as
SDO pin (please refer to the pin description for the Microprocessor
Interface).
RECEIVE INTERFACE
P
IN
#
S
IGNAL
N
AME
T
YPE
D
ESCRIPTION
相關PDF資料
PDF描述
XRT75L02 TWO CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER
XRT75L02IV TWO CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER
XRT75L03D THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
XRT75L04D FOUR CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
XRT75L04DIV FOUR CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
相關代理商/技術參數
參數描述
XRT75L00DIV-F 功能描述:外圍驅動器與原件 - PCI 1-Ch DS3, E3, SONET RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
XRT75L00DIVTR 功能描述:時鐘合成器/抖動清除器 3.3V 1 CH E3/DS3/STS W/SONET DE-SYNCH RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75L00DIVTR-F 功能描述:時鐘合成器/抖動清除器 3.3V 1 CH E3/DS3/STS W/SONET DE-SYNCH RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75L00ES 功能描述:時鐘合成器/抖動清除器 1CH T3/E3/STS1 LIU+JA 3.3V RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
XRT75L00IV 功能描述:外圍驅動器與原件 - PCI 3.3V 1 CH E3/DS3/STS W/JITTER ATTEN RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*