參數資料
型號: 28F016SA16-MBIT
廠商: Intel Corp.
英文描述: Evaluation Kit/Evaluation System for the MAX5954L/MAX5954A
中文描述: (1兆比特× 16。2兆比特× 8)FlashFile記憶
文件頁數: 19/48頁
文件大小: 304K
代理商: 28F016SA16-MBIT
E
SMART 3 ADVANCED BOOT BLOCK
19
PRELIMINARY
Table 7. Status Register Bit Definition
WSMS
ESS
ES
PS
VPPS
PSS
BLS
R
7
6
5
4
3
2
1
0
NOTES:
SR.7 = WRITE STATE MACHINE STATUS (WSMS)
1 = Ready
0 = Busy
Check Write State Machine bit first to determine
word program or block erase completion, before
checking program or erase status bits.
SR.6 = ERASE-SUSPEND STATUS (ESS)
1 = Erase Suspended
0 = Erase In Progress/Completed
When erase suspend is issued, WSM halts
execution and sets both WSMS and ESS bits to
“1.”
ESS bit remains set at “1” until an Erase Resume
command is issued.
SR.5 = ERASE STATUS (ES)
1 = Error In Block Erasure
0 = Successful Block Erase
When this bit is set to “1,” WSM has applied the
max. number of erase pulses to the block and is still
unable to verify successful block erasure.
SR.4 = PROGRAM STATUS (PS)
1 = Error in Word Program
0 = Successful Word Program
When this bit is set to “1,” WSM has attempted but
failed to program a word.
SR.3 = V
PP
STATUS (VPPS)
1 = V
PP
Low Detect, Operation Abort
0 = V
PP
OK
The V
PP
status bit does not provide continuous
indication of V
PP
level. The WSM interrogates V
PP
level only after the Program or Erase command
sequences have been entered, and informs the
system if V
PP
has not been switched on. The V
PP
is
also checked before the operation is verified by the
WSM. The V
PP
status bit is not guaranteed to report
accurate feedback between V
PPLK
max and V
PP1
min
or between V
PP1
max and V
PP4
min.
SR.2 = PROGRAM SUSPEND STATUS (PSS)
1 = Program Suspended
0 = Program in Progress/Completed
When program suspend is issued, WSM halts
execution and sets both WSMS and PSS bits to “1.”
PSS bit remains set to “1” until a Program Resume
command is issued.
SR.1 = Block Lock Status
1 = Program/Erase attempted on locked
block; Operation aborted
0 = No operation to locked blocks
If a program or erase operation is attempted to one
of the locked blocks, this bit is set by the WSM. The
operation specified is aborted and the device is
returned to read status mode.
SR.0 = RESERVED FOR FUTURE
ENHANCEMENTS (R)
This bit is reserved for future use and should be
masked out when polling the status register.
相關PDF資料
PDF描述
28F016SV 16-MBIT (1 MBIT x 16, 2 MBIT x 8) FlashFile MEMORY
28F016SA 16-Mbit(1 Mbit x 16, 2 Mbit x 8) FlashFile Memory(16-M位(1 M位 x 16, 2 M位 x 8) FlashFile存儲器)
28F016XD 16-Mbit Synchronous Flash Memory(16M位DRAM接口閃速存儲器)
28F016XS 16-Mbit Synchronous Flash Memory(16M位同步閃速存儲器)
28F020 5 V Bulk Erase Flash Memory(5V 整體擦寫閃速存儲器)
相關代理商/技術參數
參數描述
28F016SC 制造商:未知廠家 制造商全稱:未知廠家 功能描述:28F016SC - BYTE-WIDE SmartVoltage FlashFile MEMORY FAMILY 4. 8. AND 16 MBIT
28F016SV 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:16-MBIT (1 MBIT x 16, 2 MBIT x 8) FlashFile MEMORY
28F016XD 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:16-MBIT (1 MBIT x 16) DRAM-INTERFACE FLASH MEMORY
28F016XS 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:16-MBIT (1 MBIT x 16, 2 MBIT x 8) SYNCHRONOUS FLASH MEMORY
28F0181-1SR-10 功能描述:電磁干擾濾波珠子、扼流圈和陣列 115ohms 100MHz 10A Broad Band Frequency RoHS:否 制造商:AVX 阻抗: 最大直流電流:35 mA 最大直流電阻: 容差: 端接類型:SMD/SMT 電壓額定值:25 V 工作溫度范圍:- 25 C to + 85 C 封裝 / 箱體:0603 (1608 metric)