參數資料
型號: AD9148-M5372-EBZ
廠商: Analog Devices Inc
文件頁數: 14/72頁
文件大?。?/td> 0K
描述: BOARD EVAL FOR AD9149, ADL5372
設計資源: AD9148-M5372-EBZ Schematic
AD9148-M5372-EBZ BOM
AD9148-M5372-EBZ Gerber Files
標準包裝: 1
系列: *
Data Sheet
AD9148
Rev. B | Page 21 of 72
TERMINOLOGY
Integral Nonlinearity (INL)
INL is defined as the maximum deviation of the actual analog
output from the ideal output, determined by a straight line
drawn from zero scale to full scale.
Differential Nonlinearity (DNL)
DNL is the measure of the variation in analog value, normalized
to full scale, associated with a 1 LSB change in digital input code.
Monotonicity
A DAC is monotonic if the output either increases or remains
constant as the digital input increases.
Offset Error
The deviation of the output current from the ideal of zero is called
offset error. For IOUTx_P, 0 mA output is expected when the
inputs are all 0s. For IOUTx_N, 0 mA output is expected when
all inputs are set to 1.
Gain Error
The difference between the actual and ideal output span. The
actual span is determined by the difference between the output
when all inputs are set to 1 and the output when all inputs are
set to 0.
Output Compliance Range
The range of allowable voltage at the output of a current-output
DAC. Operation beyond the maximum compliance limits can
cause either output stage saturation or breakdown, resulting in
nonlinear performance.
Temperature Drift
Temperature drift is specified as the maximum change from the
ambient (25°C) value to the value at either TMIN or TMAX. For
offset and gain drift, the drift is reported in ppm of full-scale
range (FSR) per degrees Celsius. For reference drift, the drift is
reported in ppm per degrees Celsius.
Power Supply Rejection (PSR)
The maximum change in the full-scale output as the supplies
are varied from minimum to maximum specified voltages.
Settling Time
The time required for the output to reach and remain within a
specified error band around its final value, measured from the
start of the output transition.
In-Band Spurious Free Dynamic Range (SFDR)
The difference, in decibels, between the peak amplitude of the
output signal and the peak spurious signal between dc and the
frequency equal to half the input data rate.
Out-of-Band Spurious Free Dynamic Range (SFDR)
The difference, in decibels, between the peak amplitude of the
output signal and the peak spurious signal within the band that
starts at the frequency of the input data rate and ends at the
Nyquist frequency of the DAC output sample rate. Normally,
energy in this band is rejected by the interpolation filters. This
specification, therefore, defines how well the interpolation
filters work and the effect of other parasitic coupling paths on
the DAC output.
Total Harmonic Distortion (THD)
THD is the ratio of the rms sum of the first six harmonic com-
ponents to the rms value of the measured fundamental. It is
expressed as a percentage or in decibels.
Signal-to-Noise Ratio (SNR)
SNR is the ratio of the rms value of the measured output signal
to the rms sum of all other spectral components below the
Nyquist frequency, excluding the first six harmonics and dc.
The value for SNR is expressed in decibels.
Interpolation Filter
An interpolation filter up-samples the input digital data by a
multiple of fDATA (interpolation rate) and then filters out the
undesired spectral images created by the up-sampling process.
Adjacent Channel Leakage Ratio (ACLR)
The ratio in dBc between the measured power within a channel
relative to its adjacent channel.
Complex Image Rejection
In a traditional two-part upconversion, two images are created
around the second IF frequency. These images have the effect of
wasting transmitter power and system bandwidth. By placing
the real part of a second complex modulator in series with the
first complex modulator, either the upper or lower frequency
image near the second IF can be rejected.
相關PDF資料
PDF描述
AD9737A-EBZ BOARD EVAL FOR AD9737A
MIC2026-1YM IC DISTRIBUTION SW DUAL 8-SOIC
VI-B1L-EY CONVERTER MOD DC/DC 28V 50W
AD9706-DPG2-EBZ BOARD EVAL FOR AD9706
AD9705-DPG2-EBZ BOARD EVAL FOR AD9705
相關代理商/技術參數
參數描述
AD9148-M5375-EBZ 功能描述:BOARD EVAL FOR AD9149, ADL5375 RoHS:是 類別:編程器,開發系統 >> 評估板 - 數模轉換器 (DAC) 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- DAC 的數量:4 位數:12 采樣率(每秒):- 數據接口:串行,SPI? 設置時間:3µs DAC 型:電流/電壓 工作溫度:-40°C ~ 85°C 已供物品:板 已用 IC / 零件:MAX5581
AD9152BCPZ 功能描述:16 Bit Digital to Analog Converter 2 56-LFCSP-WQ (8x8) 制造商:analog devices inc. 系列:TxDAC+? 包裝:托盤 零件狀態:有效 位數:16 數模轉換器數:2 建立時間:- 輸出類型:Current - Unbuffered 差分輸出:是 數據接口:JESD204B 參考類型:內部 電壓 - 電源,模擬:3.13 V ~ 3.47 V 電壓 - 電源,數字:1.14 V ~ 1.26 V INL/DNL(LSB):±10,±5 架構:電流源 工作溫度:-40°C ~ 85°C 封裝/外殼:56-WFQFN 裸焊盤,CSP 供應商器件封裝:56-LFCSP-WQ(8x8) 標準包裝:1
AD9152BCPZRL 功能描述:16 Bit Digital to Analog Converter 2 56-LFCSP-WQ (8x8) 制造商:analog devices inc. 系列:TxDAC+? 包裝:帶卷(TR) 零件狀態:有效 位數:16 數模轉換器數:2 建立時間:- 輸出類型:Current - Unbuffered 差分輸出:是 數據接口:JESD204B 參考類型:內部 電壓 - 電源,模擬:3.13 V ~ 3.47 V 電壓 - 電源,數字:1.14 V ~ 1.26 V INL/DNL(LSB):±10,±5 架構:電流源 工作溫度:-40°C ~ 85°C 封裝/外殼:56-WFQFN 裸焊盤,CSP 供應商器件封裝:56-LFCSP-WQ(8x8) 標準包裝:2,500
AD9152-EBZ 功能描述:AD9152 TxDAC+? Series 16 Bit 2.25G Samples Per Second Digital to Analog Converter (DAC) Evaluation Board 制造商:analog devices inc. 系列:TxDAC+? 零件狀態:有效 DAC 數:2 位數:16 采樣率(每秒):2.25G 數據接口:SPI 建立時間:- DAC 類型:電流 工作溫度:-40°C ~ 85°C 所含物品:板,線纜 使用的 IC/零件:AD9152 標準包裝:1
AD9152-FMC-EBZ 功能描述:AD9152 TxDAC+? Series 16 Bit 2.25G Samples Per Second Digital to Analog Converter (DAC) Evaluation Board 制造商:analog devices inc. 系列:TxDAC+? 零件狀態:有效 DAC 數:2 位數:16 采樣率(每秒):2.25G 數據接口:SPI 建立時間:- DAC 類型:電流 工作溫度:-40°C ~ 85°C 所含物品:板,線纜 使用的 IC/零件:AD9152 標準包裝:1