16
FN3365.10
October 6, 2008
Absolute Maximum Ratings
Thermal Information
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7.0V
Input, Output or I/O Voltage . . . . . . . . . . . . GND -0.5V to VCC +0.5V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Operating Conditions
Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.75V to +5.25V
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
Thermal Resistance (Typical, Note 1)
θJA (°C/W) θJC (°C/W)
PLCC Package. . . . . . . . . . . . . . . . . . .
23.0
N/A
MQFP Package . . . . . . . . . . . . . . . . . .
35.0
N/A
Maximum Junction Temperature
PLCC and MQFP Packages . . . . . . . . . . . . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . . -65°C to +150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . +300°C
Die Characteristics
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35469 Gates
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1.
θJA is measured with the component mounted on an evaluation PC board in free air.
DC Electrical Specifications
VCC = 5.0V ± 5%, TA = 0° to +70°C
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
UNITS
Power Supply Current
ICCOP
VCC = Max, CLK Frequency 52MHz
INT/EXT = ‘1’, Notes 2, 4
-468
mA
VCC = Max, CLK Frequency 52MHz
INT/EXT = ‘0’, Notes 3, 4
-572
mA
Standby Power Supply Current
ICCSB
VCC = Max, Outputs Not Loaded
-
500
μA
Input Leakage Current
II
VCC = Max, Input = 0V or VCC
-10
10
μA
Output Leakage Current
IO
VCC = Max, Input = 0V or VCC
-10
10
μA
Clock Input High
VIHC
VCC = Max
3.0
-
V
Clock Input Low
VILC
VCC = Min
-
0.8
V
Logical One Input Voltage
VIH
VCC = Max
2.0
-
V
Logical Zero Input Voltage
VIL
VCC = Min
-
0.8
V
Logical One Output Voltage
VOH
IOH = -3mA, VCC = Min
2.6
-
V
Logical Zero Output Voltage
VOL
IOL = 5mA, VCC = Min
-
0.4
V
Input Capacitance
CIN
CLK Frequency 1MHz, All measurements
referenced to GND. TA = +25°C, Note 5
-12
pF
Output Capacitance
COUT
-12
pF
NOTES:
2. Power supply current is proportional to frequency. Typical rating is 9mA/MHz when Internal Multiplexing is selected, INT/EXT = 1.
3. Power supply current is proportional to frequency. Typical rating is 11mA/MHz when External Multiplexing is selected, INT/EXT = 0.
4. Output load per test circuit and CL = 40pF.
5. Not tested, but characterized at initial design and at major process/design changes.
6. Maximum junction temperature must be considered when operating part at high clock frequencies.
HSP43216