參數資料
型號: MT90220
廠商: Mitel Networks Corporation
英文描述: Octal IMA/UNI PHY Device(八端口 IMA/UNI 物理層設備(八端口ATM IMA和UNI處理器))
中文描述: 八路IMA的/單向物理層設備(八端口IMA的/單向物理層設備(八端口自動柜員機IMA的和單向處理器))
文件頁數: 31/118頁
文件大?。?/td> 310K
代理商: MT90220
MT90220
23
4.0 Description of the PCM Interface
To provide support for the IMA Asymmetrical mode,
the Transmit PCM blocks are independent from the
Receive PCM blocks. The TX port of a framer can be
connected to any of the MT90220 TX UTOPIA Input
ports and the RX port of a framer can be connected
to any of the MT90220 RX UTOPIA Output ports.
4.1
Serial to Parallel (S/P) and Parallel to Serial
(P/S) Converters
Each T1/E1 link has a S/P and P/S unit assigned.
The P/S unit takes a byte from the cell RAM and
converts it to a serial bit stream. The S/P unit takes a
byte from the DSTi input and converts it to parallel
format for use by the Cell Delineation block.
The system interface supports both the ST-BUS
(2.048 Mbps bus) and generic PCM Interface. Note
that the ST-BUS is compatible with the so-called
MVIP mode that is supported by some T1 or E1
framer manufacturers.
The MT90220 generates and receives the PCM
channels only (24 or 23 with T1, 30 with E1). The
control/status channels of the framers and the
signaling channels are
MT90220.
not supported by the
P/S and S/P units can be set-up differently on a per
port and per direction basis (i.e. the transmit and
receive function of the same port can use different
configurations).
The
following
supported:
programming links as T1 or E1
features
are
using ST-BUS and Generic PCM modes
enabling/disabling the P/S and S/P units (if they
are disabled the associated outputs are Tri-
stated)
mapping T1 links, on a per port and per
direction basis, to use either the first 24
channels or 3 of every 4 channels (when ST-
BUS or 2.048 clock modes are selected)
programming T1 links to ignore timeslot 24 and
reserve it for signaling (since only 23 timeslots
are used to carry the ATM cells, this option
should be applied to all links of the same IMA
Group)
independently programming the polarity of
RXCK, TXCK, RXSYNC and TXSYNC signals
(Generic PCM mode only)
generating/accepting TXSYNC and TXCLK
signals to support most T1 and E1 framers
(depending on the programmed mode)
monitoring RXSYNC signal period and
reporting the unexpected occurrence of a
synchronization signal (see 4.3.1 Verification of
the RXSYNC Period, for more details)
monitoring TXSYNC signal period (when
defined as input) and reporting the unexpected
occurrence of a synchronization signal (see
4.3.2 Verification of the TXSYNC Period, for
more details)
generating a TXSYNC pulse on every PCM
frame when defined as output
assigning any TX or RX link to any IMA Group
When the TXCK and TXSYNC signals are outputs,
the source for the TXCLK is software selectable from
any of the eight RXCK inputs or any of the four
external REFCKs. The TXSYNC signal is generated
Figure 8 - Example of UNI Mode Operation
(Using Four of Eight Possible UTOPIA-Output Ports)
RXCK
RXSYNC
DSTi
S/P
RXCK
RXSYNC
DSTi
RXCK
RXSYNC
DSTi
RXCK
RXSYNC
DSTi
UTOPIA
Interface
Cell
System Clock
S/P
S/P
S/P
Delineation
Idle Cell
Removal
Cell
Delineation
Idle Cell
Removal
Cell
Delineation
Idle Cell
Removal
Cell
Delineation
Idle Cell
Removal
相關PDF資料
PDF描述
MT90221 Quad IMA/UNI PHY Device(四端口 IMA/UNI 物理層設備(四端口ATM IMA和UNI處理器))
MT90401 SONET/SDH System Synchronizer(SONET/SDH 系統同步裝置(由一個數字鎖相環組成))
MT9040 T1/E1 Synchronizer(T1/E1 系統同步裝置(由一個數字鎖相環組成))
MT9041A ()
MT9041B T1/E1 System Synchronizer(T1/E1系統同步裝置(由一個數字鎖相環組成))
相關代理商/技術參數
參數描述
MT90220AL 制造商:Zarlink Semiconductor Inc 功能描述:I.C.
MT90220ALX01 制造商:Mitel Networks Corporation 功能描述:
MT90221 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:Quad IMA/UNI PHY Device
MT90221AL 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:Quad IMA/UNI PHY Device
MT90222 制造商:ZARLINK 制造商全稱:Zarlink Semiconductor Inc 功能描述:4/8/16 Port IMA/TC PHY Device