參數資料
型號： TS83102G0BMGS
廠商： ATMEL CORP
元件分類： ADC
英文描述： 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CBGA152
封裝： HERMATIC, CI-CGA-152
文件頁數： 7/52頁
文件大小： 1548K
代理商： TS83102G0BMGS
15
5360A–BDC–06/05
TS83102G0BMGS
5.
Thermal and Moisture Characteristics
5.1
Dissipation by Conduction and Convection
The thermal resistance from junction to ambient RTH
JA is around 30°C/W. Therefore, to lower
RTH
JA, it is mandatory to use an external heat sink to improve dissipation by convection and
conduction. The heat sink should be fixed in contact with the top side of the package (AI203 iso-
lation over CuW heat spreader).
The heat sink does not need to be electrically isolated, because the top of the package is
already electrically isolated thanks to a 0.30 mm AI203 layer.
Example:
The thermal resistance from case to ambient RTH
CA is typically 4.0°C/W (0 m/s air flow or still
air) with the heat sink depicted in Figure 5-1 on page 16, of dimensions 50 mm x 50 mm x 28
mm (respectively L x l x H).
The global junction to ambient thermal resistance RTH
JA is:
4.8
°C/W RTH
JC + 2.0°C/W thermal grease resistance + 4.0°C/W RTHCA (case to ambient) =
10.8
°C/W total (RTH
JA).
Assuming:
A typical thermal resistance from the junction to the top of the case RTH
JC of 4.35°C/W (finite
element method thermal simulation results): this value does not include the thermal contact
resistance between the package and the external heat sink (glue, paste, or thermal foil inter-
face, for example). As an example, use a 2.0
°C/W value for a
50 m thickness of thermal grease.
Note:
Example of the calculation of the ambient temperature TA max to ensure TJ max = 110°C:
assuming RTH
JA = 10.8°C/W and power dissipation = 4.6 W, TA max = TJ - (RTHJA x 4.6 W) =
110 - (10.8 x 4.6) = 60.32
°C. T
A max can be increased by lowering RTHJA with an adequate air
flow ( 2 m/s, for example).
相關PDF資料
PDF描述
TS83102G0BVGL 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CBGA152
TS83102G0BCGL 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CBGA152
TS83110CZT 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CDFP28
TS83110MZT 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CDFP28
TS83110VZT 1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CDFP28
相關代理商/技術參數
參數描述
TS83102G0BVGL 制造商:e2v technologies 功能描述:ADC SGL 2GSPS 10-BIT PARALLEL 152CBGA - Trays
TS83102G0CGL 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog to Digital Converter
TS83102G0GSZR5 制造商:e2v technologies 功能描述:TS83102G0GSZR5 - Trays
TS831-3I 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE LOW
TS831-3ID 功能描述:監控電路 2.71V Micropower AL RoHS:否 制造商:STMicroelectronics 監測電壓數: 監測電壓: 欠電壓閾值: 過電壓閾值: 輸出類型:Active Low, Open Drain 人工復位:Resettable 監視器:No Watchdog 電池備用開關:No Backup 上電復位延遲（典型值）:10 s 電源電壓-最大:5.5 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:UDFN-6 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*