TABLE
參數資料
型號： XRT83SL34IV-F
廠商： Exar Corporation
文件頁數： 49/80頁
文件大小： 0K
描述： IC LIU T1/E1/J1 QUAD 128TQFP
標準包裝： 72
類型： 線路接口裝置（LIU）
驅動器/接收器數： 4/4
規程： T1，E1，J1
電源電壓： 3.135 V ~ 3.465 V
安裝類型： 表面貼裝
封裝/外殼： 128-LQFP
供應商設備封裝： 128-TQFP（14x20）
包裝： 托盤
XRT83SL34
QUAD T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
REV. 1.0.0
50
TABLE 22: MICROPROCESSOR REGISTER #3, BIT DESCRIPTION
REGISTER ADDRESS
0000011
0010011
0100011
0110011
CHANNEL_n
CHANNEL_0
CHANNEL_1
CHANNEL_2
CHANNEL_3
FUNCTION
REGISTER
TYPE
RESET
VALUE
BIT #NAME
D7
NLCDE1_n
Network Loop Code Detection Enable Bit 1:
This bit together with NLCDE0_n control the Loop-Code detec-
tion of each channel.
When NLCDE1 =”0” and NLCDE0 = “1” or NLCDE1 = “1” and
NLCDE0 = “0”, the chip is manually programmed to monitor
the receive data for the Loop-Up or Loop-Down code respec-
tively.When the presence of the “00001” or “001” pattern is
detected for more than 5 seconds, the status of the NLCD bit is
set to “1” and if the NLCD interrupt is enabled, an interrupt is
initiated.The Host has the option to control the Loop-Back
function manually.
Setting the NLCDE1 = “1” and NLCDE0 = “1” enables the
Automatic Loop-Code detection and Remote Loop-Back acti-
vation mode. As this mode is initiated, the state of the NLCD
interface bit is reset to “0” and the chip is programmed to mon-
itor the receive data for the Loop-Up code. If the “00001” pat-
tern is detected for longer than 5 seconds, the NLCD bit is set
“1”, Remote Loop-Back is activated and the chip is automati-
cally programmed to monitor the receive data for the Loop-
Down code. The NLCD bit stays set even after the chip stops
receiving the Loop-Up code. The Remote Loop-Back condition
is removed when the chip receives the Loop-Down code for
more than 5 seconds or if the Automatic Loop-Code detection
mode is terminated.
R/W
0
D6
NLCDE0_n
Network Loop Code Detection Enable Bit 0:
See description of D7 for function of this bit.
R/W
0
D5
CODES_n
Encoding and Decoding Select:
Writing a “0” to this bits selects HDB3 or B8ZS encoding and
decoding for channel number n. Writing “1” selects an AMI
coding scheme. This bit is only active when single rail mode is
selected.
R/W
0
NLCDE1
NLCDE0
0
1
0
1
Function
Disable Loop-code
detection
Detect Loop-Up code
in receive data
Detect Loop-Down
code in receive data
Automatic Loop-Code
detection
相關PDF資料
PDF描述
XRT83SL38IB-F IC LIU SH T1/E1/J1 OCTAL 225BGA
XRT83VL38IB-F IC LIU SH T1/E1/J1 OCTAL 225BGA
XRT83VSH28IB IC LIU SH E1 OCTAL 225BGA
XRT83VSH314IB-F IC LIU SH T1/E1/J1 14CH 304TBGA
XRT83VSH316IB IC LIU SH T1/E1/J1 16CH 316STBGA
相關代理商/技術參數
參數描述
XRT83SL38 制造商:EXAR 制造商全稱:EXAR 功能描述:OCTAL T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
XRT83SL38_07 制造商:EXAR 制造商全稱:EXAR 功能描述:OCTAL T1/E1/J1 SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER
XRT83SL38ES 功能描述:外圍驅動器與原件 - PCI 8 CHT1/E1LIUSH RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
XRT83SL38ES-BG 功能描述:界面開發工具 Eval System for XRT83SL38 Series RoHS:否 制造商:Bourns 產品:Evaluation Boards 類型:RS-485 工具用于評估:ADM3485E 接口類型:RS-485 工作電源電壓:3.3 V
XRT83SL38IB 功能描述:時鐘合成器/抖動清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*