XRT83VL38
68
OCTAL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
REV. 1.0.1
TABLE 29: MICROPROCESSOR REGISTER #6, BIT DESCRIPTION
REGISTER ADDRESS
00000110
00010110
00100110
00110110
01000110
01010110
01100110
01110110
CHANNEL_n
CHANNEL_0
CHANNEL_1
CHANNEL_2
CHANNEL_3
CHANNEL_4
CHANNEL_5
CHANNEL_6
CHANNEL_7
FUNCTION
REGISTER
TYPE
RESET
VALUE
BIT #
NAME
D7
Reserved
RO
0
D6
DMOIS_n
Driver Monitor Output Interrupt Status:
This bit is set to a
“1” every time the DMO status has changed since last read.
NOTE: This bit is reset upon read.
RUR
0
D5
FLSIS_n
FIFO Limit Interrupt Status:
This bit is set to a “1” every time
when FIFO Limit (Read/Write pointer with +/- 3 bits apart) sta-
tus has changed since last read.
NOTE: This bit is reset upon read.
RUR
0
D4
LCVIS_n
Line Code Violation Interrupt Status:
This bit is set to a “1”
every time when LCV status has changed since last read.
NOTE: This bit is reset upon read.
RUR
0
D3
NLCDIS_n
Network Loop-Code Detection Interrupt Status:
This bit is
set to a “1” every time when NLCD status has changed since
last read.
NOTE: This bit is reset upon read.
RUR
0
D2
AISDIS_n
AIS Detection Interrupt Status:
This bit is set to a “1” every
time when AISD status has changed since last read.
NOTE: This bit is reset upon read.
RUR
0
D1
RLOSIS_n
Receive Loss of Signal Interrupt Status:
This bit is set to a
“1” every time RLOS status has changed since last read.
NOTE: This bit is reset upon read.
RUR
0
D0
QRPDIS_n
Quasi-Random Pattern Detection Interrupt Status:
This bit
is set to a “1” every time when QRPD status has changed
since last read.
NOTE: This bit is reset upon read.
RUR
0