533
APPENDIX A DEVELOPMENT TOOLS
A.3 Debugging Tools
A.3.1 Hardware (1/2)
(1) When using the in-circuit emulator IE-78K4-NS
IE-78K4-NS
Note
In-circuit Emulator
IE-70000-MC-PS-B
Power Supply Unit
IE-70000-98-IF-C
Note
Interface Adapter
IE-70000-CD-IF
Note
PC Card Interface
IE-70000-PC-IF-C
Note
Interface Adapter
IE-784046-NS-EM1
Note
Emulation Board
NP-80GC
Emulation Probe
EV-9200GC-80
Conversion Socket
(Refer to
Figures
A-2 and A-3
)
Note
Under development
Remarks 1.
NP-80GC is a product of Naito Densei Machida Mfg. Co., Ltd.
Phone: (044) 822-3813 Naito Densei Machida Mfg. Co., Ltd.
2.
EV-9200GC-80 is sold in five units.
The in-circuit emulator serves to debug hardware and software when developing
application systems using a 78K/IV Series product. It corresponds to integrated
debugger (ID78K4-NS). This emulator should be used in combination with power
supply unit, emulation probe, and interface adapter which is required to connect this
emulator to the host machine.
This adapter is used for supplying power from a receptacle of 100-V to 200-V AC.
This adapter is required when using the PC-9800 Series computer (except notebook
type) as the IE-78K4-NS host machine.
This is PC card and interface cable required when using the PC-9800 Series
notebook-type computer as the IE-78K4-NS host machine.
This adapter is required when using the IBM PC/AT and its compatible computers
as the IE-78K4-NS host machine.
This board emulates the operations of the peripheral hardware peculiar to a device.
It should be used in combination with an in-circuit emulator.
This probe is used to connect the in-circuit emulator to the target system and is
designed for 80-pin plastic QFP (GC-3B9 type).
This conversion socket connects the NP-80GC to the target system board designed
to mount a 80-pin plastic QFP (GC-3B9 type).