AMIS49587
http://onsemi.com
42
Table 44. DATA BASE ENTRIES THAT MODIFY THE CONFIGURATION
Field Name
Ident
Description
FIMA/LIMA
0000
Changes the value of First Initiator MAC Address (FIMA) and Last Initiator MAC
Address (LIMA)
LocalMacAdd/InitMacAdd
0001
Changes the value of Local MAC
Address and Active Initiator Address
Timeoutsynchroconfirm
0002
Changes the value of the TO synchro confirm (In seconds.)
Timeoutframenotok
0003
Changes the value of the TO frame not ok (In seconds)
Timeoutnotaddressed
0004
Changes the value of the TO not addressed (In minutes)
Macgroupaddresses
0005
Changes the value of the 5 MAC group addresses
Mindeltacredit
0007
Read the value of the Min delta credit and then set to 7
Max_Transmitting_Gain: Mode and Value
(R_ALC_CTRL)
0008
Changes the mode and the value of the max transmitting gain
SYNCHROType:Mode
SYNCHROBit:Value
0009
Changes sychro mode and the synchro bit value
MaxReceivingGain: Mode and Value
000A
Changes the mode and the value of the Max Receiving gain
Repeater
000B
Changes the repeater state
Frequency
000C
Changes the value of the frequencies Fs and Fm
TimeSearchInitiator
0011
Changes the value of the TO Search Initiator (In seconds)
ReadConfig
0012
To get an echo of the current configuration of the FPMA
Read SoftVersion
0013
Read the version of the FPMA
MinReceivingGain Value
0014
Changes the value of the Min Receiving Gain
GainSearchInitiator
0015
Changes the value of the GainSearchInitiator
7.3.5.1 FIMA/LIMA
This request is used to modify the value of the FIMA and LIMA addresses. The values of FIMA and LIMA must be in the
field 0001 to 0FFF, and must be compatible with current value of LocalMacAdd and InitMacAdd.
Request Format:
<STX>
0x09(Length)
0x41 (AccessDB_Request)
0x0000
FIMA (2 bytes), LIMA (2 bytes)
CHK
Confirm Format:
<STX>
0x09(Length)
0x42 (AccessDB_Confirm)
0x0000
FIMA (2 bytes), LIMA (2 bytes)
CHK
7.3.5.2 LocalMacAdd/InitMacAdd
This request is used to modify the value of the Local Mac Address and the Initiator Mac Address. The values of LocalMacAdd
and InitMacAdd must be in the field 0001 to 0FFF, and must be compatible with current value of FIMA and LIMA.
Request Format:
<STX>
0x09(Length)
0x41 (AccessDB_Request)
0x0100
LocalMacAdd (2 bytes), InitMacAdd (2 bytes)
CHK
Confirm Format:
<STX>
0x09(Length)
0x42 (AccessDB_Confirm)
0x0100
LocalMacAdd (2 bytes), InitMacAdd (2 bytes)
CHK
7.3.5.3 TimeoutSynchro
This request is used to modify the value of the timeout synchro confirmation. The Timeout Synchro Confirm is set in seconds.
Request Format:
<STX>
0x07(Length)
0x41 (AccessDB_Request)
0x0200
TO Synchro Confirm (2 bytes)
CHK