參數資料
型號： ISP1161A1BM,557
廠商： NXP SEMICONDUCTORS
元件分類： 總線控制器
英文描述： UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
封裝： 7 X 7 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-414-1, LQFP-64
文件頁數： 114/137頁
文件大?。?/td> 599K
代理商： ISP1161A1BM,557
Philips Semiconductors
ISP1161A1
USB single-chip host and device controller
Product data
Rev. 03 — 23 December 2004
77 of 136
9397 750 13961
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
11. USB device controller (DC)
The Device Controller (DC) in the ISP1161A1 is based on the Philips ISP1181B USB
Full-Speed Interface Device IC. The functionality, commands, and register sets are
the same as ISP1181B in 16-bit bus mode. If there is any difference between the
ISP1181B and ISP1161A1 data sheets, in terms of the DC functionality, the
ISP1161A1 data sheet supersedes content in the ISP1181B data sheet.
In general the DC in an ISP1161A1 provides 16 endpoints for USB device
implementation. Each endpoint can be allocated an amount of RAM space in the
on-chip Ping-Pong buffer RAM.
Remark: The Ping-Pong buffer RAM for the DC is independent of the buffer RAM in
the HC.
When the buffer RAM is full, the DC will transfer the data in the buffer RAM to the
USB bus. When the buffer RAM is empty, an interrupt is generated to notify the
microprocessor to feed in the data. The transfer of data between the microprocessor
and the DC can be done in Programmed I/O (PIO) mode or in DMA mode.
11.1 DC data transfer operation
The following session explains how the DC of an ISP1161A1 handles an IN data
transfer and an OUT data transfer. In the Device mode, the ISP1161A1 acts as a USB
device: an IN data transfer means transfer from the ISP1161A1 to an external USB
Host (through the upstream port) and an OUT transfer means transfer from external
USB Host to the ISP1161A1.
11.1.1
IN data transfer
The arrival of the IN token is detected by the SIE by decoding the PID.
The SIE also checks for the device number and endpoint number and veries
whether they are acceptable.
If the endpoint is enabled, the SIE checks the contents of the DcEndpointStatus
register. If the endpoint is full, the contents of the FIFO are sent during the data
phase, otherwise a Not Acknowledge (NAK) handshake is sent.
After the data phase, the SIE expects a handshake (ACK) from the host (except for
ISO endpoints).
On receiving the handshake (ACK), the SIE updates the contents of the
DcEndpointStatus register and the DcInterrupt register, which in turn generates an
interrupt to the microprocessor. For ISO endpoints, the DcInterrupt register is
updated as soon as data is sent because there is no handshake phase.
On receiving an interrupt, the microprocessor reads the DcInterrupt register. It will
know which endpoint has generated the interrupt and reads the contents of the
corresponding DcEndpointStatus register. If the buffer is empty, it lls up the buffer,
so that data can be sent by the SIE at the next IN token phase.
11.1.2
OUT data transfer
The arrival of the OUT token is detected by the SIE by decoding the PID.
相關PDF資料
PDF描述
ISP1181BBS,551 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BBS,518 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BDGG,112 UNIVERSAL SERIAL BUS CONTROLLER, PDSO48
ISP1183BS,157 UNIVERSAL SERIAL BUS CONTROLLER, PQCC32
ISP1362EE,551 UNIVERSAL SERIAL BUS CONTROLLER, PBGA64
相關代理商/技術參數
參數描述
ISP1161A1BMGA 功能描述:IC USB HOST/DEVICE CTRLR 64-LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
ISP1161A1BM-S 功能描述:USB 接口集成電路 USB HOST+DEV CTRLR RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161A1BM-T 功能描述:USB 接口集成電路 USB1.1 HOST/DEVICE CONTROLLER RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161A1BMUM 功能描述:IC USB HOST CONTROLLER 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
ISP1161ABD 功能描述:IC USB HOST/DEVICE CTRLR 64-LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*