參數資料
型號： M37735MHBXXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
封裝： 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件頁數： 59/93頁
文件大小： 1802K
代理商： M37735MHBXXXFP
59
MITSUBISHI MICROCOMPUTERS
M37735MHBXXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
PRELIMINAR
Y
Notice:
This
is not
a final
specification.
Some
parametric
limits
are
subject
to change.
Note that the port-XC selection bit cannot be cleared by software
when it is once set to “1”. The bit can be cleared only by reset. It is
impossible to write “1” to the port-XC selection bit and the system
clock selection bit at the same time. In addition, the contents of the
main clock stop bit and the XCOUT drivability selection bit cannot be
changed when the port-XC selection bit is “0”.
Figure 67 shows the system clock selection change example when
using the sub clock. When the system clock selection bit is “1” after
sub-clock oscillation starts, the sub clock is selected as the system
clock. Make sure to select the sub clock after the sub-clock oscillation
is fully stabilized.
When the main clock stop bit is set to “1” after the sub clock is selected,
the main-clock oscillation/input stops. By stopping the main-clock
oscillation, current consumption can be further restricted.
When the main clock stop bit is cleared to “0” after the main-clock
oscillation stops, the main-clock oscillation/input restarts.
When the system clock selection bit is “0” after the main-clock
oscillation restarts, the main clock is selected as the system clock
again. Make sure to select the main clock after the main-clock
oscillation restarts and is fully stabilized.
The XCOUT drivability selection bit is a bit to select the drivability of
the sub-clock oscillation circuit and is set to “1” (HIGH) after reset is
released. Make sure to clear the XCOUT drivability selection bit to “0”
(LOW) after the sub-clock oscillation is fully stabilized.
Port-Xc selection bit (CM4)
System colck selection bit (CM3)
Main clock stop bit (CM2)
System clock
Main-clock oscillation
Sub-clock oscillation
Oscillation stabilizing time
Stop
Operating
Oscillation stabilizing time
Main clock
Sub clock
Main clock
Stopped
Fig. 67 System clock selection change example
相關PDF資料
PDF描述
M37735MHLXXXHP 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
M37735S4LHP 16-BIT, 12 MHz, MICROCONTROLLER, PQFP80
M37736EHBGS 16-BIT, UVPROM, 24 MHz, MICROCONTROLLER, CQCC100
M37736EHBXXXGP 16-BIT, OTPROM, 25 MHz, MICROCONTROLLER, PQFP100
M37736EHBGS 16-BIT, UVPROM, 25 MHz, MICROCONTROLLER, CQCC100
相關代理商/技術參數
參數描述
M37735MHL 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37735MHL-143HP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:PROM VERSION OF M37735MHLXXXHP
M37735MHLXXXHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37735S4BFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37735S4LHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*