參數資料
型號： M58WR064HU70ZB6U
元件分類： PROM
英文描述： 4M X 16 FLASH 1.8V PROM, 70 ns, PBGA44
封裝： 7.70 X 9 MM, 0.50 MM PITCH, ROHS COMPLIANT, VFBGA-44
文件頁數： 35/117頁
文件大?。?/td> 2300K
代理商： M58WR064HU70ZB6U
Command interface - Standard commands
M58WR064HU M58WR064HL
5.8
Program/Erase Suspend command
The Program/Erase Suspend command is used to pause a Program or Block Erase
operation. A Bank Erase operation cannot be suspended.
One bus write cycle is required to issue the Program/Erase command. Once the
Program/Erase Controller has paused bits SR7, SR6 and/ or SR2 of the Status Register will
be set to ‘1’. The command can be addressed to any bank.
During Program/Erase Suspend the Command Interface will accept the Program/Erase
Resume, Read Array (cannot read the suspended block), Read Status Register, Read
Electronic Signature and Read CFI Query commands. Additionally, if the suspend operation
was Erase then the Clear status Register, Program, Block Lock, Block Lock-Down or Block
Unlock commands will also be accepted. The block being erased may be protected by
issuing the Block Lock, Block Lock-Down or Protection Register Program commands. Only
the blocks not being erased may be read or programmed correctly. When the
Program/Erase Resume command is issued the operation will complete. Refer to the
simultaneous operations allowed during Program/Erase Suspend.
During a Program/Erase Suspend, the device can be placed in standby mode by taking
Chip Enable to VIH. Program/Erase is aborted if Reset turns to VIL.
the Program/Erase Suspend command.
5.9
Program/Erase Resume command
The Program/Erase Resume command can be used to restart the Program/Erase Controller
after a Program/Erase Suspend command has paused it. One Bus Write cycle is required to
issue the command. The command can be written to any address.
The Program/Erase Resume command does not change the read mode of the banks. If the
suspended bank was in Read Status Register, Read Electronic signature or Read CFI
Query mode the bank remains in that mode and outputs the corresponding data. If the bank
was in Read Array mode subsequent read operations will output invalid data.
If a Program command is issued during a Block Erase Suspend, then the erase cannot be
resumed until the programming operation has completed. It is possible to accumulate
suspend operations. For example: suspend an erase operation, start a programming
operation, suspend the programming operation then read the array. See Appendix C,
Suspend & Resume flowchart and pseudo code, for flowcharts for using the Program/Erase
Resume command.
相關PDF資料
PDF描述
M59DR032F100N1T 2M X 16 FLASH 1.8V PROM, 100 ns, PDSO48
M5F7924 24 V FIXED NEGATIVE REGULATOR, PSFM3
M5F7920 20 V FIXED NEGATIVE REGULATOR, PSFM3
M5F7918 18 V FIXED NEGATIVE REGULATOR, PSFM3
M5F7915 15 V FIXED NEGATIVE REGULATOR, PSFM3
相關代理商/技術參數
參數描述
M58WR064KB70ZB6E 制造商:Micron Technology Inc 功能描述:WIRELESS FLASH VFBGA 7.7X9.0X1.0 56 8X7 0.75 - Trays 制造商:Micron Technology Inc 功能描述:IC FLASH 64MBIT 70NS 56VFBGA
M58WR064KB70ZB6F 制造商:Micron Technology Inc 功能描述:FLASH 28F640W18TD 60 VF-PBGA56 SB48 EX - Tape and Reel
M58WR064KB70ZB6F TR 制造商:Micron Technology Inc 功能描述:IC FLASH 64MBIT 70NS 56VFBGA
M58WR064KB7AZB6E 制造商:Micron Technology Inc 功能描述:WIRELESS - Trays 制造商:Micron Technology Inc 功能描述:IC FLASH 64MBIT 70NS 56VFBGA
M58WR064KB7AZB6F 制造商:Micron Technology Inc 功能描述:WIRELESS - Tape and Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*