參數資料
型號: MAX1358BETL+W
廠商: Maxim Integrated Products
文件頁數: 46/71頁
文件大?。?/td> 0K
描述: DAS 16BIT DUAL 10:1 40-TQFN
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 50
類型: 數據采集系統(DAS)
分辨率(位): 16 b
采樣率(每秒): 21.94k
數據接口: MICROWIRE?,QSPI?,串行,SPI?
電壓電源: 模擬和數字
電源電壓: 1.8 V ~ 3.6 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 40-WFQFN 裸露焊盤
供應商設備封裝: 40-TQFN-EP(6x6)
包裝: 托盤
MAX1358B
16-Bit, Data-Acquisition System with ADC, DACs,
UPIOs, RTC, Voltage Monitors, and Temp Sensor
50
______________________________________________________________________________________
The SLEEP_CFG register allows users to program spe-
cific behavior for the 32kHz oscillator, buffer, and PWM
in sleep mode. It also contains a sleep-control bit (SLP)
to enable sleep mode.
SLP (ADR0): Sleep bit. The SLP bit is the LSB in the
SLEEP_CFG address control byte. Set SLP = 1 to
assert the SHDN bit and enter sleep mode. Writing the
register with SLP = 0 or reading with SLP = 0 or
SLP = 1 has no effect on the SHDN bit.
SOSCE: Sleep-mode 32kHz crystal oscillator enable
bit. SOSCE = 1 enables the 32kHz oscillator in sleep
mode, and SOSCE = 0 disables it in sleep mode,
regardless of the state of the OSCE bit. The power-on
default is 1.
SCK32E: Sleep-mode CK32K-pin output-buffer enable
bit. SCK32E = 1 enables the 32kHz output buffer in
sleep mode, and SCK32E = 0 disables it in sleep
mode, regardless of the state of the CK32E bit. The
power-on default is 1.
SPWME: Sleep-mode PWM enable bit. SPWME = 1
enables the internal PWM in sleep mode, and
SPWME = 0 disables it in sleep mode, regardless of the
state of the PWME bit.
Input frequencies are limited to 32.768kHz or lower
since the high-frequency clock is disabled in sleep
mode. SOSCE must be asserted to have 32kHz avail-
able as an input to the PWM. The power-on default is 0.
SHDN: Shutdown bit. This bit is read only. SHDN is
asserted by writing to the SLEEP register address or by
writing to the SLEEP_CFG register with SLP = 1. When
SHDN is asserted, the device is in sleep mode even if
the SLEEP or
SLEEP function on the UPIO is deassert-
ed. The SHDN bit is deasserted by writing to the
NORM_MD register or by other defined events. Events
that cause SHDN to be deasserted are a day alarm or
an edge on the UPIO wake-up pin causing wake-up to
be asserted. The power-on default is 0.
MSB
LSB
SLP (ADR0)
SOSCE
SCK32E
SPWME
SHDN
X
SLEEP_CFG Register (Power-On State: 1100 XXXX)
4Hz CLOCK
2-BIT COUNTER
X
WDE = 1
01
2
3
RESET
WATCHDOG
ADDRESS
01
2
WATCHDOG
ADDRESS
WATCHDOG
ADDRESS
01
0
1
2
0
750ms
250ms
SPI WRITES
D
Q
R
CK
DQ
Q
R
CK
DIVIDE-
BY-8192
32K
WDE
POR
WDW
WATCHDOG TIMER
4Hz
RESET
Figure 17. Watchdog Timer Architecture
相關PDF資料
PDF描述
MAX1406EWE IC TX/RX RS232 230KBPS 16-SOIC
MAX1414CAI+T IC DAS 16BIT LP 28-SSOP
MAX1441GUP/V+ IC PROXMITY SENSOR 2CH 20-TSSOP
MAX14502AETL+T IC CARD READER USB-SD 40-TQFN
MAX14505EWC+T IC SWITCH DUAL SPDT 12WLP
相關代理商/技術參數
參數描述
MAX1358EVKIT+ 制造商:Maxim Integrated Products 功能描述:EVALUATION KIT FOR THE MAX1358 - Boxed Product (Development Kits)
MAX1359ACGL 制造商:Maxim Integrated Products 功能描述:- Rail/Tube
MAX1359ACTL 制造商:Maxim Integrated Products 功能描述:16-BIT DATA-ACQUISITION SYSTEM W ADC,DACS,UPI - Rail/Tube
MAX1359ACTL+ 制造商:Maxim Integrated Products 功能描述:DATA ACQ SYS SGL ADC SGL DAC 16BIT 40TQFN EP - Rail/Tube
MAX1359ACTL+T 制造商:Maxim Integrated Products 功能描述:DATA ACQ SYS SGL ADC SGL DAC 16BIT 40TQFN EP - Tape and Reel