參數資料
型號: MT80C51T-36D
廠商: TEMIC SEMICONDUCTORS
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 36 MHz, MICROCONTROLLER, PQFP44
文件頁數: 132/189頁
文件大?。?/td> 4133K
代理商: MT80C51T-36D
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁第125頁第126頁第127頁第128頁第129頁第130頁第131頁當前第132頁第133頁第134頁第135頁第136頁第137頁第138頁第139頁第140頁第141頁第142頁第143頁第144頁第145頁第146頁第147頁第148頁第149頁第150頁第151頁第152頁第153頁第154頁第155頁第156頁第157頁第158頁第159頁第160頁第161頁第162頁第163頁第164頁第165頁第166頁第167頁第168頁第169頁第170頁第171頁第172頁第173頁第174頁第175頁第176頁第177頁第178頁第179頁第180頁第181頁第182頁第183頁第184頁第185頁第186頁第187頁第188頁第189頁
64
ATtiny4/5/9/10 [DATASHEET]
8127F–AVR–02/2013
Figure 11-9.
Fast PWM Mode, Timing Diagram
The Timer/Counter Overflow Flag (TOV0) is set each time the counter reaches TOP. In addition the OC0A or ICF0
flag is set at the same timer clock cycle as TOV0 is set when either OCR0A or ICR0 is used for defining the TOP
value. If one of the interrupts are enabled, the interrupt handler routine can be used for updating the TOP and com-
pare values.
When changing the TOP value the program must ensure that the new TOP value is higher or equal to the value of
all of the Compare Registers. If the TOP value is lower than any of the Compare Registers, a compare match will
never occur between the TCNT0 and the OCR0x. Note that when using fixed TOP values the unused bits are
masked to zero when any of the OCR0x Registers are written.
The procedure for updating ICR0 differs from updating OCR0A when used for defining the TOP value. The ICR0
Register is not double buffered. This means that if ICR0 is changed to a low value when the counter is running with
none or a low prescaler value, there is a risk that the new ICR0 value written is lower than the current value of
TCNT0. The result will then be that the counter will miss the compare match at the TOP value. The counter will
then have to count to the MAX value (0xFFFF) and wrap around starting at 0x0000 before the compare match can
occur. The OCR0A Register however, is double buffered. This feature allows the OCR0A I/O location to be written
anytime. When the OCR0A I/O location is written the value written will be put into the OCR0A Buffer Register. The
OCR0A Compare Register will then be updated with the value in the Buffer Register at the next timer clock cycle
the TCNT0 matches TOP. The update is done at the same timer clock cycle as the TCNT0 is cleared and the
TOV0 flag is set.
Using the ICR0 Register for defining TOP works well when using fixed TOP values. By using ICR0, the OCR0A
Register is free to be used for generating a PWM output on OC0A. However, if the base PWM frequency is actively
changed (by changing the TOP value), using the OCR0A as TOP is clearly a better choice due to its double buffer
feature.
In fast PWM mode, the compare units allow generation of PWM waveforms on the OC0x pins. Setting the
COM0x1:0 bits to two will produce a non-inverted PWM and an inverted PWM output can be generated by setting
the COM0x1:0 to three (see Table 11-3 on page 73). The actual OC0x value will only be visible on the port pin if
the data direction for the port pin is set as output (DDR_OC0x). The PWM waveform is generated by setting (or
clearing) the OC0x Register at the compare match between OCR0x and TCNT0, and clearing (or setting) the
OC0x Register at the timer clock cycle the counter is cleared (changes from TOP to BOTTOM).
TCNTn
OCRnx/TOP Update and
TOVn Interrupt Flag Set and
OCnA Interrupt Flag Set
or ICFn Interrupt Flag Set
(Interrupt on TOP)
1
7
Period
2
3
4
5
6
8
OCnx
(COMnx1:0 = 2)
(COMnx1:0 = 3)
相關PDF資料
PDF描述
MS80C31-12R 8-BIT, 12 MHz, MICROCONTROLLER, PQCC44
MT80C51C-12D 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP44
MS80C31-20R 8-BIT, 20 MHz, MICROCONTROLLER, PQCC44
MV80C51T-16D 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP44
MP80C31-30D 8-BIT, 30 MHz, MICROCONTROLLER, PDIP40
相關代理商/技術參數
參數描述
MT80GB 制造商:Datak Corporation 功能描述:
MT80JSF1G72NDY-1G1F1A2 制造商:Micron Technology Inc 功能描述:8GB 1GX72 DDR3 SDRAM MODULE PBF DIMM 1.5V REGISTERED - Trays
MT80KSF1G72NDY-1G4F1A3 制造商:Micron Technology Inc 功能描述:8GB 1GX72 DDR3 SDRAM MODULE PBF DIMM 1.35V FULLY BUFFERED - Trays
MT810 制造商:MARKTECH 制造商全稱:Marktech Corporate 功能描述:STANDARD T-1 3/4 LED LAMPS
MT-8100 制造商:Eclipse Tools 功能描述: